Print Report | Back to Sample Detail

Sample Record for 2020-12-11-6

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214579 DEA: 010B0904 EFIS: 0100020444 QA Service Level: 1
DIST-CO-RTE-PM: 01-DN-101-8.2/8.7
Work Description: BRIDGE REPLACEMENT
Location Description: DEL NORTE COUNTY NEAR KLAMATH AT PANTHER CREEK BRIDGE AND AT HUNTER CREEK BRIDGE
Contractor Name: Golden State Bridge, Inc
Contractor Address: 3701 Mallard Dr., Benicia, CA 94510
Resident Engineer: Clayton Malmberg (cc in email) Structure Rep.: Bryan Keene

Sample Information

DIME Sample ID: 2020-12-11-6
TL Number from the TL Form:
Sample Submitted By Organization: CT QASI - Sacramento Field Laboratory
Sample Organization Contact: (916) 227-7263
Type of Sample: Acceptance
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 12/11/2020
Date that the sample was received by the laboratory/organization performing the testing: 12/14/2020
The quantity of what the sample constitutes: 1
A brief description of the sample: 1" A709 Gr 50 plate
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Thompson Metal Fab

Material Information

Heat Number(s): 20A2824
Material Specification: A709
Grade: 50
Thickness: 1
Shape: plate
Metal Foundry Manufacturer (Mill): Nucor
Plate Dimension: 96x480

Test Results

Test 1 of 4

DIME Test ID: 2020-12-11-6-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 01/27/2021
Date Tested: 01/12/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 2
SampleHeat NumberDiameter (in)Area (sqin)Stress at Offset (psi)Tensile Strength (psi)Elongation in 4 x d (%)Tested By
20A28240.50.19635640897632633bewing
20A28240.50.19635639607614233.1bewing
UTM 67kip
Temperature 72 F

Test 2 of 4

DIME Test ID: 2020-12-11-6-2
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 01/27/2021
Date Tested: 01/13/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 40 oF
Impact Energy 1 284.6 ftlb
Impact Energy 2 291 ftlb
Impact Energy 3 290.6 ftlb
Average Impact Energy 289 ftlb
Striker Radius 8
Value Exceeds The Machine Capacity? Yes

Test 3 of 4

DIME Test ID: 2020-12-11-6-3
Test Method: ASTM E415-17: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Verified Date: 01/27/2021
Date Tested: 01/21/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Content, carbon 0.070 %
Content, Si 0.178 %
Content, Mn 1.34 %
Content, P 0.0087 %
Content, S 0.0024 %
Content, Cr 0.054 %
Content, Mo 0.018 %
Content, Al 0.043 %
Content, Co 0.014 %
Content, Copper 0.170 %
Content, Nb 0.036 %
Content, Ti 0.017 %
Content, V 0.053 %
Content, Lead 0.0089 %
Content, Boron 0.0005 %
Content, Fe 97.8 %
Content, Ni 0.075 %

Test 4 of 4

DIME Test ID: 2020-12-11-6-4
Test Method: ASTM E415-17: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Verified Date: 01/27/2021
Date Tested: 01/21/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Content, carbon 0.070 %
Content, Si 0.178 %
Content, Mn 1.34 %
Content, P 0.0087 %
Content, S 0.0024 %
Content, Cr 0.054 %
Content, Mo 0.018 %
Content, Al 0.043 %
Content, Co 0.014 %
Content, Copper 0.170 %
Content, Nb 0.036 %
Content, Ti 0.017 %
Content, V 0.053 %
Content, Lead 0.0089 %
Content, Boron 0.0005 %
Content, Fe 97.8 %
Content, Ni 0.075 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.