Sample Record for 2020-12-09-1
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 214029 DEA: 07301104 EFIS: 0714000009
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-60,710-710-R2.8/11.8, 24.1/25.1
Work Description: Roadway ex, place jointed plain concrete pavement & concrete barrieres
Location Description: In Los Angeles County at avocado Heights on Route 60 from 0.5 Mile west of Route 60/710 Separation to Route 60/605 Separation AND on Route 710 from 0.5 miles south of Route 710/60 Separation to 0.5 mile north of Route 710/60 Separation.
Contractor Name: GUY F. ATKINSON CONSTRUCTION, LLC
Contractor Address: 18201 Von Karman Ave #800, Irvine, CA 92612
Resident Engineer: Sepand Minovi Structure Rep.: Rick Jensen
Sample Information
DIME Sample ID: 2020-12-09-1
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Stock
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 12/09/2020
Date that the sample was received by the laboratory/organization performing the testing: 12/09/2020
The quantity of what the sample constitutes: 1226
A brief description of the sample: A449 Heavy Hex Bolt
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier: 07-301104
Structure name: na
The fabricator/manufacturer/facility name: Universal Industrial Sales Inc
Material Information
Rocap Number(s): na
Heat Number(s): 20695270
Nut Mfg. Lot Number(s): na
Washer Mfg. Lot Number(s): na
Bolt Specification: A449
Bolt Length(s): 17.5"
Nut Specification: na
Washer Specification: na
Finish: Hot Dip Galvanize
Diameter/Size: 7/8"
Bolt Mfg. Lot Number: 33397
Rocap Test Requirement(s): na
Lubricant Requirements(s): na
Test Results
Test 1 of 12
DIME Test ID: 2020-12-09-1-1
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Verified Date: 12/22/2020
Date Tested: 12/21/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test: A449 Headed Bolt 10 deg
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments | | 1A | UNC 7/8 | 0.462 | 60195 | 267 | 130279 | 0 | 0 | A449 Headed Bolt 10 deg |
| |
|
UTM
|
400kip
|
|
Temperature
|
72
|
Test 2 of 12
DIME Test ID: 2020-12-09-1-2
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Verified Date: 12/22/2020
Date Tested: 12/21/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test: A449 Headed Bolt 10 deg
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments | | 1B | UNC 7/8 | 0.462 | 58585 | 260 | 126806 | 110623 | 51108 | A449 Headed Bolt 10 deg |
| |
|
UTM
|
400kip
|
|
Temperature
|
72
|
Test 3 of 12
DIME Test ID: 2020-12-09-1-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/22/2020
Date Tested: 12/21/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
20695270
|
|
Mfg. Lot Number
|
33397
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A449 01AF
|
|
Size
|
.875 in
|
|
Bolt Length
|
17.5 in
|
|
Gage Type
|
Pass
|
Test 4 of 12
DIME Test ID: 2020-12-09-1-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/22/2020
Date Tested: 12/21/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
20695270
|
|
Mfg. Lot Number
|
33397
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A449 01AF
|
|
Size
|
.875 in
|
|
Bolt Length
|
17.5 in
|
|
Gage Type
|
Pass
|
Test 5 of 12
DIME Test ID: 2020-12-09-1-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/22/2020
Date Tested: 12/21/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
20695270
|
|
Mfg. Lot Number
|
33397
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A449 01AF
|
|
Size
|
.875 in
|
|
Bolt Length
|
17.5 in
|
|
Gage Type
|
Pass
|
Test 6 of 12
DIME Test ID: 2020-12-09-1-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/22/2020
Date Tested: 12/21/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
20695270
|
|
Mfg. Lot Number
|
33397
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A449 01AF
|
|
Size
|
.875 in
|
|
Bolt Length
|
17.5 in
|
|
Gage Type
|
Pass
|
Test 7 of 12
DIME Test ID: 2020-12-09-1-7
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/22/2020
Date Tested: 12/21/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
20695270
|
|
Mfg. Lot Number
|
33397
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A449 01AF
|
|
Size
|
.875 in
|
|
Bolt Length
|
17.5 in
|
|
Gage Type
|
Pass
|
Test 8 of 12
DIME Test ID: 2020-12-09-1-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/22/2020
Date Tested: 12/21/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
20695270
|
|
Mfg. Lot Number
|
33397
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A449 01AF
|
|
Size
|
.875 in
|
|
Bolt Length
|
17.5 in
|
|
Measurement Average
|
3.95 mils
|
Test 9 of 12
DIME Test ID: 2020-12-09-1-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/22/2020
Date Tested: 12/21/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
20695270
|
|
Mfg. Lot Number
|
33397
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A449 01AF
|
|
Size
|
.875 in
|
|
Bolt Length
|
17.5 in
|
|
Measurement Average
|
3.44 mils
|
Test 10 of 12
DIME Test ID: 2020-12-09-1-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/22/2020
Date Tested: 12/21/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
20695270
|
|
Mfg. Lot Number
|
33397
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A449 01AF
|
|
Size
|
.875 in
|
|
Bolt Length
|
17.5 in
|
|
Measurement Average
|
3.98 mils
|
Test 11 of 12
DIME Test ID: 2020-12-09-1-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/22/2020
Date Tested: 12/21/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
20695270
|
|
Mfg. Lot Number
|
33397
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A449 01AF
|
|
Size
|
.875 in
|
|
Bolt Length
|
17.5 in
|
|
Measurement Average
|
3.6 mils
|
Test 12 of 12
DIME Test ID: 2020-12-09-1-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/22/2020
Date Tested: 12/21/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
20695270
|
|
Mfg. Lot Number
|
33397
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
A449 01AF
|
|
Size
|
.875 in
|
|
Bolt Length
|
17.5 in
|
|
Measurement Average
|
3.3 mils
|
