Print Report | Back to Sample Detail

Sample Record for 2020-11-30-6

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212085 DEA: 07296604 EFIS: 0713000057 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-10-14.0/19.0
Work Description: PAINT AND REHABILITATE BRIDGE - (STRAIN (PAINT AND INSTALL CATWALK)
Location Description: IN THE CITY OF LOS ANGELES, AT SANTA MONICA VIADUCT (BR. NO. 53-1301). PAINT AND REHABILITATE BRIDGE
Contractor Name: CL Industrial Coating Inc.
Contractor Address: 11650 Western Ave., Stanton, CA 90680
Resident Engineer: Pravin Patel Structure Rep.: Shmara, Nabil

Sample Information

DIME Sample ID: 2020-11-30-6
TL Number from the TL Form:
Sample Submitted By Organization: CT QASI - Los Angeles Field Laboratory
Sample Organization Contact: (858) 285-5797
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 11/30/2020
Date that the sample was received by the laboratory/organization performing the testing: 12/04/2020
The quantity of what the sample constitutes: 140
A brief description of the sample: ASTM A325 TC Bolt Assembly
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Page Industrial

Material Information

Rocap Number(s):
Heat Number(s):
Nut Mfg. Lot Number(s): 33449-191009
Washer Mfg. Lot Number(s): D9305
Bolt Specification: ASTM 325-TC
Bolt Length(s): 2 1/4"
Nut Specification: ASTM A563 DH
Washer Specification: ASTM F435
Finish: Mechanical Galvanized
Diameter/Size: 7/8"
Bolt Mfg. Lot Number: 33480-10669080
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 17

DIME Test ID: 2020-11-30-6-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: A563
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
33449-19100972537A563fsaylor
UTM 450kip
Temperature 72 f

Test 2 of 17

DIME Test ID: 2020-11-30-6-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 33480-10669080
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size .875 in
Bolt Length 2.25 in
Gage Type Pass

Test 3 of 17

DIME Test ID: 2020-11-30-6-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 33480-10669080
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size .875 in
Bolt Length 2.25 in
Gage Type Pass

Test 4 of 17

DIME Test ID: 2020-11-30-6-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 33480-10669080
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size .875 in
Bolt Length 2.25 in
Gage Type Pass

Test 5 of 17

DIME Test ID: 2020-11-30-6-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 33480-10669080
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size .875 in
Bolt Length 2.25 in
Measurement Average 3.99 mils

Test 6 of 17

DIME Test ID: 2020-11-30-6-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 33480-10669080
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size .875 in
Bolt Length 2.25 in
Measurement Average 3.01 mils

Test 7 of 17

DIME Test ID: 2020-11-30-6-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 33480-10669080
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size .875 in
Bolt Length 2.25 in
Measurement Average 3.52 mils

Test 8 of 17

DIME Test ID: 2020-11-30-6-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 33449-191009
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size .875 in
Bolt Length no data in
Measurement Average 2.77 mils

Test 9 of 17

DIME Test ID: 2020-11-30-6-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 33449-191009
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size .875 in
Bolt Length no data in
Measurement Average 3.19 mils

Test 10 of 17

DIME Test ID: 2020-11-30-6-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 33449-191009
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size .875 in
Bolt Length no data in
Measurement Average 5.4 mils

Test 11 of 17

DIME Test ID: 2020-11-30-6-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D9305
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size .875 in
Bolt Length no data in
Measurement Average 2.84 mils

Test 12 of 17

DIME Test ID: 2020-11-30-6-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D9305
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size .875 in
Bolt Length no data in
Measurement Average 2.67 mils

Test 13 of 17

DIME Test ID: 2020-11-30-6-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D9305
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size .875 in
Bolt Length no data in
Measurement Average 3.19 mils

Test 14 of 17

DIME Test ID: 2020-11-30-6-14
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 33480-10669080
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size .875 in
Bolt Length 2.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.62
Spacing Ok

Test 15 of 17

DIME Test ID: 2020-11-30-6-15
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 33480-10669080
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size .875 in
Bolt Length 2.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.15
Spacing Ok

Test 16 of 17

DIME Test ID: 2020-11-30-6-16
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D9305
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 39.75
Spacing Ok

Test 17 of 17

DIME Test ID: 2020-11-30-6-17
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/14/2020
Date Tested: 12/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D9305
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 40.9
Spacing Ok

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.