Print Report | Back to Sample Detail

Sample Record for 2014-02-20-10443772

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 10016 DEA: 06342524 EFIS: 0600000381 QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE-180-R71.8/74.5
Work Description: NEW EXPRESS HIGHWAY
Location Description: FRESNO COUNTY ABOUT 6.3 MILES EAST OF FRESNO FROM 0.6 MILE WEST OF QUALITY AVENUE TO 0.2 MILE WEST OF SMITH AVENUE
Contractor Name: American Paving Co
Contractor Address: 315 North Thorne Avenue, Fresno, CA 93706
Resident Engineer: Mark Mengoni Structure Rep.: Mike Bloom

Sample Information

DIME Sample ID: 2014-02-20-10443772
TL Number from the TL Form:
Sample Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Sample Organization Contact: 559-292-2188
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 02/20/2014
Date that the sample was received by the laboratory/organization performing the testing: 02/21/2014
The quantity of what the sample constitutes: 10 concrete cylinders
A brief description of the sample: Type II Cement
From where was the sample collected: Other
Laboratory sample identification: 2014-02-20-10-45-02
Structure unique identifier: Mainline Bridge Deck E/B
Structure name: Mainline Bridge Deck E/B
The fabricator/manufacturer/facility name: Mainline Bridge Deck East Bound

Material Information

The concrete mix design number: ND14505
The truck number from where the sample was collected: 9381
The batch plant ticket number from where the sample was collected: 114104937
Concrete batch plant: 114
The fabricator/manufacturer designation for the sample: Plant
A detailed description of where the material sample was collected: Mainline Bridge Deck E/B
Where the material sample would have been placed if not sampled: Mainline Bridge Deck E/B
From Lot No.:
Bag Lot No.:

Test Results

Test 1 of 8

DIME Test ID: 2014-02-20-10443772-1
Test Method: ASTM C138-10b: Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
Verified Date: 04/09/2014
Date Tested: 02/20/2014
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Identification of concrete represented by the sample 2014-02-20-10-45-02
Volume of the measure 0.25 ft^3
Density of concrete 145.8 lb/ft^3
Yield of concrete 9.4 yd^3
Relative yield of the batch 0.99
Cement content 7.18 lb/ft^3
Air content 2.1 %

Test 2 of 8

DIME Test ID: 2014-02-20-10443772-2
Test Method: ASTM C143-10a: Standard Test Method for Slump of Hydraulic-Cement Concrete
Verified Date: 04/09/2014
Date Tested: 02/20/2014
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Slump 6.5 inch

Test 3 of 8

DIME Test ID: 2014-02-20-10443772-3
Test Method: ASTM C1064-08: Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
Verified Date: 04/09/2014
Date Tested: 02/20/2014
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Temperature 67 F

Test 4 of 8

DIME Test ID: 2014-02-20-10443772-4
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Verified Date: 04/09/2014
Date Tested: 02/27/2014
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 2
Test performed With density determined by dimension measurements
Average cylinder density (to nearest 1 pcf) 146.7 lb/ft^3
Average diameter of cylinder 1 6.00 in
Average diameter of cylinder 2 6.00 in
Comment on any defect in either specimen or caps (Max 250 Characters) no data

Test 5 of 8

DIME Test ID: 2014-02-20-10443772-5
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Verified Date: 04/09/2014
Date Tested: 03/03/2014
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 1
Test performed With density determined by dimension measurements
Density of cylinder 147 lb/ft^3
Average diameter of cylinder 1 6.00 in
Comment on any defect in either specimen or caps (Max 250 Characters) no data

Test 6 of 8

DIME Test ID: 2014-02-20-10443772-6
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Verified Date: 04/09/2014
Date Tested: 03/06/2014
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 2
Test performed With density determined by dimension measurements
Average cylinder density (to nearest 1 pcf) 147 lb/ft^3
Average diameter of cylinder 1 6.00 in
Average diameter of cylinder 2 6.00 in
Comment on any defect in either specimen or caps (Max 250 Characters) no data

Test 7 of 8

DIME Test ID: 2014-02-20-10443772-7
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Verified Date: 04/09/2014
Date Tested: 03/20/2014
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 2
Test performed With density determined by dimension measurements
Average cylinder density (to nearest 1 pcf) 146.8 lb/ft^3
Average diameter of cylinder 1 6.00 in
Average diameter of cylinder 2 6.00 in
Comment on any defect in either specimen or caps (Max 250 Characters) no data

Test 8 of 8

DIME Test ID: 2014-02-20-10443772-8
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Verified Date: 04/09/2014
Date Tested: 04/04/2014
Submitted By Organization: Trinity Engineering Laboratories, Inc. - Fresno
Organization Address: 2437 N. Sunnyside Ave.,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email:
Organization Phone: 559-292-2188
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 2
Test performed With density determined by dimension measurements
Average cylinder density (to nearest 1 pcf) 147.8 lb/ft^3
Average diameter of cylinder 1 6.00 in
Average diameter of cylinder 2 6.00 in
Comment on any defect in either specimen or caps (Max 250 Characters) no data

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.