Print Report | Back to Sample Detail

Sample Record for 2020-11-16-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 8801 DEA: AML-CEM EFIS: AML-CEM QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for Cementitious Materials for use in Concrete Authorized Material List (AML)
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-11-16-1
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Sample Organization Contact: (916) 227-7071
Type of Sample: Control Sample
Type of Material: Cementitious
Sample Taken Date: 11/16/2020
Date that the sample was received by the laboratory/organization performing the testing: 11/16/2020
The quantity of what the sample constitutes: 1 Bucket
A brief description of the sample: Type I/II Cement
From where was the sample collected: Source
Laboratory sample identification: CM209009
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: GCC

Material Information

Brand: GCC of America
Mill: Pueblo Colorado
Type of Cementitious Material: Type II Cement

Test Results

Test 1 of 2

DIME Test ID: 2020-11-16-1-2
Test Method: ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
Verified Date: 01/21/2021
Date Tested: 11/23/2020
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test: 7 day test
Test Result Compliance:
Additional Comments When Verified:
Will control cubes be used per ASTM C311? no
The amount of flow 117 %
The amount of water used 48.4 %
Compressive strength of 1st specimen 4638 psi
Compressive strength of 2nd specimen 4852 psi
Compressive strength of 3rd specimen 4688 psi
Average Compressive strength (to nearest 10 psi) 4730 psi

Test 2 of 2

DIME Test ID: 2020-11-16-1-3
Test Method: ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
Verified Date: 01/21/2021
Date Tested: 12/17/2020
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test: 28 day test @ 12:05
Test Result Compliance:
Additional Comments When Verified:
Will control cubes be used per ASTM C311? no
The amount of flow 117.00 %
The amount of water used 48.4 %
Compressive strength of 1st specimen 5626 psi
Compressive strength of 2nd specimen 5646 psi
Compressive strength of 3rd specimen 5543 psi
Average Compressive strength (to nearest 10 psi) 5610 psi

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.