Print Report | Back to Sample Detail

Sample Record for 2020-10-13-11

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214718 DEA: 120R5304 EFIS: 1218000112 QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-1-0.7/32.4
Work Description: PLACE METHACRYLATE, REPAIR SPALLS AND REPLACE CHAIN LINK FENCE.
Location Description: ORANGE COUNTY AT VARIOUS LOCATIONS FROM DOHENY PARK ROAD UNDERCROSSING TO NAVAL AMMUNITION DEPO OVERHEAD
Contractor Name: ODONNELL CONSTRUCTION, INC.
Contractor Address: 599 W. Covina Boulevard, San Dimas, CA 91773-2911
Resident Engineer: Arsalan Naderi Structure Rep.: Ali Jenabzadeh

Sample Information

DIME Sample ID: 2020-10-13-11
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Methacrylate
Sample Taken Date: 10/13/2020
Date that the sample was received by the laboratory/organization performing the testing: 10/13/2020
The quantity of what the sample constitutes: 25000 gallons
A brief description of the sample: 2 pints 204,chp,zcure,8020
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): 2011590689
Batch number: 2011590689
Mix number: 2011590689
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2020-10-13-11-1
Test Method: CONCLP 4-16: HMWM
Verified Date: 11/04/2020
Date Tested: 11/04/2020
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted Viscosity based on suppliers results due to machine being down.
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity (ASTM D 2196) Brookfield RVT with UL adapter, 50 RPM @ 77 deg F, 25 max cps @ 77 deg F 20 cps
Specific gravity (ASTM D 1475) 0.90 min @ 77 deg F 1.10
Volatile content (ASTM D 2369) 30% max 28 %
Flash point (ASTM D 3828) more than 180 deg F 207 F
PCC - SSD bond strength (CA Test 551) 500 psi minimum @ 24 hours 750 psi
Tack free time, 400 minutes max 375 minutes