Print Report | Back to Sample Detail

Sample Record for 2020-09-29-8

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215113 DEA: 021J2404 EFIS: 0220000048 QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-273-
Work Description: PSPS Streetlight Backing plates-Steel Cantilever structure for solar panels
Location Description:
Contractor Name: CAL ELECTRO, INC.
Contractor Address: 3710 Electro Way, Redding, CA 96002
Resident Engineer: Michael Zdenek Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-09-29-8
TL Number from the TL Form:
Sample Submitted By Organization: CT QASI - Sacramento Field Laboratory
Sample Organization Contact: (916) 227-7263
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 09/29/2020
Date that the sample was received by the laboratory/organization performing the testing: 10/02/2020
The quantity of what the sample constitutes: 80
A brief description of the sample: 1/2" X 1-1/4" domestic HDG ASTM A325 Hex bolts.
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Portland Bolt

Material Information

Rocap Number(s):
Heat Number(s): 100795675
Nut Mfg. Lot Number(s): NA
Washer Mfg. Lot Number(s): NA
Bolt Specification: ASTM F3125
Bolt Length(s): 1-1/4"
Nut Specification: NA
Washer Specification: NA
Finish: HDG
Diameter/Size: 1/2"
Bolt Mfg. Lot Number: 416504a
Rocap Test Requirement(s):
Lubricant Requirements(s): NA

Test Results

Test 1 of 8

DIME Test ID: 2020-09-29-8-1
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/08/2020
Date Tested: 10/07/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416504A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .5 in
Bolt Length 1.25 in
Gage Type Pass

Test 2 of 8

DIME Test ID: 2020-09-29-8-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/08/2020
Date Tested: 10/07/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416504A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .5 in
Bolt Length 1.25 in
Gage Type Pass

Test 3 of 8

DIME Test ID: 2020-09-29-8-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/08/2020
Date Tested: 10/07/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416504A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .5 in
Bolt Length 1.25 in
Gage Type Pass

Test 4 of 8

DIME Test ID: 2020-09-29-8-4
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/08/2020
Date Tested: 10/07/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416504A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .5 in
Bolt Length 1.25 in
Measurement Average 4.77 mils

Test 5 of 8

DIME Test ID: 2020-09-29-8-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/08/2020
Date Tested: 10/07/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416504A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .5 in
Bolt Length 1.25 in
Measurement Average 6.52 mils

Test 6 of 8

DIME Test ID: 2020-09-29-8-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/08/2020
Date Tested: 10/07/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416504A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .5 in
Bolt Length 1.25 in
Measurement Average 4.1 mils

Test 7 of 8

DIME Test ID: 2020-09-29-8-7
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/08/2020
Date Tested: 10/07/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416504A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .5 in
Bolt Length 1.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.37
Spacing Ok

Test 8 of 8

DIME Test ID: 2020-09-29-8-8
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/08/2020
Date Tested: 10/07/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416504A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .5 in
Bolt Length 1.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 27.95
Spacing Ok

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.