Print Report | Back to Sample Detail

Sample Record for 2020-09-17-18

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214907 DEA: 101K4204 EFIS: 1019000103 QA Service Level: 1
DIST-CO-RTE-PM: 10-MER,STA-165-30.6/36.7,0.0/1.6
Work Description: COLD PLANE AC PAVEMENT, RESURFACE WITH RHMA, AND MICRO-SURFACING.
Location Description: MERCED COUNTY IN AND NEAR HILMAR FROM MERCED RIVER BRIDGE TO STANISLAUS COUNTY LINE AND IN STANISLAUS COUNTY NEAR TURLOCK FROM MERCED COUNTY LINE TO ROUTE 99/165 SEPARATION
Contractor Name: TEICHERT CONSTRUCTION
Contractor Address: 400 SUNRISE AVE. SUITE 300;, ROSEVILLE CA 95661
Resident Engineer: Vince Ladiao Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-09-17-18
TL Number from the TL Form: 034040
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 09/17/2020
Date that the sample was received by the laboratory/organization performing the testing: 09/25/2020
The quantity of what the sample constitutes: 1 can
A brief description of the sample: ARB #5 Test, #4(034037), #6(034047), #7(034050) No Test, RCVD 2 Cans of each
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: FNF AC INDUSTRIES

Material Information

Asphalt modifier supplier:
Performance Grade: PG 64-16
Lot number: 1
Sublot number: 10

Test Results

Test 1 of 4

DIME Test ID: 2020-09-17-18-1
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
This test has been superseded on 10/01/2020
Reason: retested

Test 2 of 4

DIME Test ID: 2020-09-17-18-2
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 10/01/2020
Date Tested: 10/01/2020
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Per 2018 Standard Specifications
Test Result Compliance: does not comply
Additional Comments When Verified:
ASTM Thermometer used? C
Softening Point Sample 1 75 C
Softening Point Sample 2 75 C
Bath Liquid USP glycerin
Minutes Reaction no data

Test 3 of 4

DIME Test ID: 2020-09-17-18-3
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 10/01/2020
Date Tested: 10/01/2020
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Per 2018 Standard Specifications
Test Result Compliance: complies
Additional Comments When Verified:
Temperature 25 C
Final Dial reading (F1) 78 mm
Ball Penetration (P1) 0 mm
Final Dial reading (F2) 78 mm
Ball Penetration (P2) 0 mm
Final Dial reading (F3) 78 mm
Ball Penetration (P3) 0 mm
Resilience 1 22 %
Resilience 2 22 %
Resilience 3 22 %
Average Resilience 22 %
Minutes Reaction no data

Test 4 of 4

DIME Test ID: 2020-09-17-18-4
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 10/01/2020
Date Tested: 10/01/2020
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Per 2018 Standard Specifications
Test Result Compliance: does not comply
Additional Comments When Verified:
Determination Worked Penetration
Worked Penetration 22 0.1 mm

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.