Print Report | Back to Sample Detail

Sample Record for 2020-06-11-58

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213887 DEA: 024H2604 EFIS: 0218000100 QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-97-R11.5/17.1
Work Description: COLD PLANE AC, REPLACE AC SURFACING, PLACE AC, RUMBLE STRIP & STRIPE.
Location Description: SISKIYOU COUNTY ABOUT 12 MILES NORTH OF WEED FROM YELLOW BUTTE ROAD TO 0.6 MILE NORTH OF DEER MOUNTAIN ROAD
Contractor Name: ROCKY MOUNTAIN CONSTRUCTION, LLC.
Contractor Address: 4815 Tingley Lane #A, Klamath Falls, OR 97603
Resident Engineer: Jeff O. Steppat Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-06-11-58
TL Number from the TL Form: 990769
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 06/11/2020
Date that the sample was received by the laboratory/organization performing the testing: 06/11/2020
The quantity of what the sample constitutes: JMF
A brief description of the sample: 1/2-inch Type A Treated Virgin Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D78474A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Truax Plant

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-47-0037
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: JMF 19-24-S3
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2020-06-11-58-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 09/17/2020
Date Tested: 07/28/2020
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 98.4 %
Cumulative percent passing the 3/8 in. sieve 90.4 %
Cumulative percent passing the 1/4 in. sieve 78.1 %
Cumulative percent passing the #4 sieve 61.8 %
Cumulative percent passing the #8 sieve 37.9 %
Cumulative percent passing the #16 sieve 25.3 %
Cumulative percent passing the #30 sieve 17.4 %
Cumulative percent passing the #50 sieve 12.4 %
Cumulative percent passing the #100 sieve 8.8 %
Cumulative percent passing the #200 sieve 5.86 %