Print Report | Back to Sample Detail

Sample Record for 2020-08-12-23

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213154 DEA: 060G8514 EFIS: 0614000009 QA Service Level: 1
DIST-CO-RTE-PM: 06-KER-58-R52.4/R55.5
Work Description: REPLACE LANES AND SHOULDERS WITH CONTINUOUSLY REINFORCED CONCRETE.
Location Description: KERN COUNTY IN BAKERSFIELD FROM ROUTE 58/99 SEPARATION TO COTTONWOOD ROAD UNDERCROSSING
Contractor Name: SECURITY PAVING COMPANY, INC.
Contractor Address: 13170 TELFAIR AVENUE, SYLMAR, CA 91342
Resident Engineer: Amarjit Dhaliwal Structure Rep.: Mark Wittgraf

Sample Information

DIME Sample ID: 2020-08-12-23
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM7 - Epoxy Coated Rebar
Sample Taken Date: 08/12/2020
Date that the sample was received by the laboratory/organization performing the testing: 09/09/2020
The quantity of what the sample constitutes: 2
A brief description of the sample: Epoxy Coated Rebar
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CMC Rebar

Material Information

Rebar Heat Number(s): 6014064
Rebar Epoxy Batch Number(s): WG45037NA
Rebar Coating Specification: ASTM A775
Rebar Size (#): 6
Rebar Coating Color: Green
Rebar Manufacturer: CMC
Rebar Coater: CMC
Rebar Powder Manufacturer:
Release Number:
Quality Assurance Code:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2020-08-12-23-1
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Holiday)
Verified Date: 09/10/2020
Date Tested: 09/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Total Number of Holiday 1
Total Length 5
Holidays Per Linear Foot of Bar 0.2
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass

Test 2 of 2

DIME Test ID: 2020-08-12-23-3
Test Method: ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Epoxy Coating)
Verified Date: 09/10/2020
Date Tested: 09/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
First Bar Mean 8.59
Second Bar Mean 8.97
Lower spec. limit LSL 7
Upper spec. limit USL 16
Bar # for First Bar 1
Bar # for Second Bar 2
Total mean value 8.78
Total number of values less than LSL no data
Total number of values greater than USL no data

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2020-08-12-23-2ASTM A775-07b-re14: Standard Specification for Epoxy-Coated Steel Reinforcing Bars (Holiday)09/09/202009/09/2020Steven PaineCT HQ - Sacramento Structural Materials Testing LaboratorySteven Paine