Print Report | Back to Sample Detail

Sample Record for 2020-09-01-18

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214605 DEA: 051K7904 EFIS: 0519000026 QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-166-R51.1/55.0
Work Description: COLD IN-PLACE RECYCLING AND RHMA OVERLAY.
Location Description: SANTA BARBARA COUNTY ABOUT 10 MILES WEST OF NEW CUYAMA FROM CUYAMA RIVER BRIDGE TO 3.1 MILES EAST OF COTTONWOOD CANYON ROAD
Contractor Name: Calportland Construction
Contractor Address: 1625 East Donovan Rd, Santa Maria, CA 93454
Resident Engineer: Thomas Petersen Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-09-01-18
TL Number from the TL Form:
Sample Submitted By Organization: CT D05 - San Luis Obispo District Laboratory
Sample Organization Contact: (559) 230-3109
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/01/2020
Date that the sample was received by the laboratory/organization performing the testing: 09/02/2020
The quantity of what the sample constitutes: 4 boxes
A brief description of the sample: 3/4" RHMA-G w/LSM
From where was the sample collected: Manufacturer
Laboratory sample identification: 20-A-214
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CalPortland Garey Plant

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 6
HMA Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2020-09-01-18-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/08/2020
Date Tested: 09/04/2020
Submitted By Organization: CT D05 - San Luis Obispo District Laboratory
Organization Address: 50 Higuera Street,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: glenn.johnson@dot.ca.gov
Organization Phone: (805) 549-3158
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 7.78 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data