Print Report | Back to Sample Detail

Sample Record for 2020-08-31-9

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214605 DEA: 051K7904 EFIS: 0519000026 QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-166-R51.1/55.0
Work Description: COLD IN-PLACE RECYCLING AND RHMA OVERLAY.
Location Description: SANTA BARBARA COUNTY ABOUT 10 MILES WEST OF NEW CUYAMA FROM CUYAMA RIVER BRIDGE TO 3.1 MILES EAST OF COTTONWOOD CANYON ROAD
Contractor Name: Calportland Construction
Contractor Address: 1625 East Donovan Rd, Santa Maria, CA 93454
Resident Engineer: Thomas Petersen Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-08-31-9
TL Number from the TL Form:
Sample Submitted By Organization: CT D05 - San Luis Obispo District Laboratory
Sample Organization Contact: (559) 230-3109
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/31/2020
Date that the sample was received by the laboratory/organization performing the testing: 09/02/2020
The quantity of what the sample constitutes: 4 boxes
A brief description of the sample: 3/4" RHMA-G w/LSM
From where was the sample collected: Manufacturer
Laboratory sample identification: 20-A-210
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CalPortland Garey Plant

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 2
HMA Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2020-08-31-9-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 09/08/2020
Date Tested: 09/04/2020
Submitted By Organization: CT D05 - San Luis Obispo District Laboratory
Organization Address: 50 Higuera St,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: glenn.johnson@dot.ca.gov
Organization Phone: (805) 549-3158
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Test procedure used? Method A
Mass of HMA prior to ignition no data
Corrected Asphalt Binder Content 7.88 %
Mass of aggregate remaining after ignition no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data