Print Report | Back to Sample Detail

Sample Record for 2020-08-25-8

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-08-25-8
TL Number from the TL Form:
Sample Submitted By Organization: Syar Industries, Inc.
Sample Organization Contact: 707-259-5705
Type of Sample: Preliminary
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/25/2020
Date that the sample was received by the laboratory/organization performing the testing: 08/25/2020
The quantity of what the sample constitutes: 780 Pounds
A brief description of the sample: 1/2" HMA-SP WMA
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Syar Todd Road Batch

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:

Test Results

Test 1 of 5

DIME Test ID: 2020-08-25-8-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/28/2020
Date Tested: 08/25/2020
Submitted By Organization: Syar Industries, Inc.
Organization Address: 2301 Napa-Vallejo Highway,P.O. Box 2540
Organization City: Napa
Organization State: CA
Organization Zipcode: 94558
Organization Email: mherlax@syar.com
Organization Phone: 707-259-5705
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Specific Gravity for Sample 1 2.456
Theoretical maximum density at 25°C (77°F) no data

Test 2 of 5

DIME Test ID: 2020-08-25-8-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/28/2020
Date Tested: 08/25/2020
Submitted By Organization: Syar Industries, Inc.
Organization Address: 2301 Napa-Vallejo Highway,P.O. Box 2540
Organization City: Napa
Organization State: CA
Organization Zipcode: 94558
Organization Email: mherlax@syar.com
Organization Phone: 707-259-5705
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity 2.356
Bulk Specific Gravity 2 2.354
Bulk Specific Gravity 3 2.356
Average Bulk Specific Gravity 2.355

Test 3 of 5

DIME Test ID: 2020-08-25-8-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/28/2020
Date Tested: 08/25/2020
Submitted By Organization: Syar Industries, Inc.
Organization Address: 2301 Napa-Vallejo Highway,P.O. Box 2540
Organization City: Napa
Organization State: CA
Organization Zipcode: 94558
Organization Email: mherlax@syar.com
Organization Phone: 707-259-5705
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Percent Air Voids 4.1 %
Percent Air Voids 2 4.2 %
Percent Air Voids 3 4.1 %
Percent Air Voids Average 4.1 %

Test 4 of 5

DIME Test ID: 2020-08-25-8-5
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 08/28/2020
Date Tested: 08/25/2020
Submitted By Organization: Syar Industries, Inc.
Organization Address: 2301 Napa-Vallejo Highway,P.O. Box 2540
Organization City: Napa
Organization State: CA
Organization Zipcode: 94558
Organization Email: mherlax@syar.com
Organization Phone: 707-259-5705
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Average Dry Tensile Strength 181 psi
Average Wet Tensile Strength 98 psi
Tensile Strength Ratio 54.14

Test 5 of 5

DIME Test ID: 2020-08-25-8-6
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 08/28/2020
Date Tested: 08/25/2020
Submitted By Organization: Syar Industries, Inc.
Organization Address: 2301 Napa-Vallejo Highway,P.O. Box 2540
Organization City: Napa
Organization State: CA
Organization Zipcode: 94558
Organization Email: mherlax@syar.com
Organization Phone: 707-259-5705
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Asphalt Binder Content 5.50 %
Correction Factor (Percent by mass of HMA Specimen) no data

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.