Print Report | Back to Sample Detail

Sample Record for 2020-08-27-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: STOCK EFIS: STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-08-27-7
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Informational
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 08/27/2020
Date that the sample was received by the laboratory/organization performing the testing: 09/03/2020
The quantity of what the sample constitutes: 6
A brief description of the sample: Steel Check Sample
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: NA

Material Information

Heat Number(s): NA
Material Specification: A36
Grade: NA
Thickness: NA
Shape: Round
Metal Foundry Manufacturer (Mill): NA
Plate Dimension: NA

Test Results

Test 1 of 7

DIME Test ID: 2020-08-27-7-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 09/03/2020
Date Tested: 09/03/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 12
SampleHeat NumberDiameter (in)Area (sqin)Stress at Offset (psi)Tensile Strength (psi)Elongation in 4 x d (%)Tested By
1Pile 16 Waler Web0.2530.0503416986854036.79BEWING
2Pile 16 Waler Web0.2540.0507421527031036.08BEWING
3Pile 16 HP Web0.2530.0503487078035429.62SPAINE
4Pile 16 HP Web0.2490.0487471917968929.32SPAINE
5Pile 1 Face0.2530.0503430127202932.33SPAINE
6Pile 1 Face0.2500.0491432157139533.63SPAINE
7Pile 1 Waler Web0.2520.0499407116721232.58BEWING
8Pile 1 Waler Web0.2530.0503411106724933.09BEWING
9Pile 10 HP Flange Face0.2510.0495413696802632.53BEWING
10Pile 10 HP Flange Face0.2510.0495423976737632.79BEWING
11Pile 8 HP Web0.2520.0499415356522133.82BEWING
12Pile 8 HP Web0.2520.0499398226416433.86BEWING
UTM 67KIP
Temperature 72.0 f

Test 2 of 7

DIME Test ID: 2020-08-27-7-2
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/03/2020
Date Tested: 08/28/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) Pile 16 Waler web
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size no data in
Bolt Length no data in
Hardness Reading Scale B Scale
Hardness Reading Average 71.5
Spacing Ok

Test 3 of 7

DIME Test ID: 2020-08-27-7-3
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/03/2020
Date Tested: 08/31/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 2A
Rocap Number no data
Heat Number(s) Pile 16 HP Web
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size no data in
Bolt Length no data in
Hardness Reading Scale B Scale
Hardness Reading Average 70.1
Spacing Ok

Test 4 of 7

DIME Test ID: 2020-08-27-7-4
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/03/2020
Date Tested: 08/31/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 3A
Rocap Number no data
Heat Number(s) Pile 1 Face
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size no data in
Bolt Length no data in
Hardness Reading Scale B Scale
Hardness Reading Average 72.2
Spacing Ok

Test 5 of 7

DIME Test ID: 2020-08-27-7-5
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/03/2020
Date Tested: 09/03/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 4A
Rocap Number no data
Heat Number(s) Pile 1 Waler Web
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size no data in
Bolt Length no data in
Hardness Reading Scale B Scale
Hardness Reading Average 68
Spacing Ok

Test 6 of 7

DIME Test ID: 2020-08-27-7-6
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/03/2020
Date Tested: 09/03/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 5A
Rocap Number no data
Heat Number(s) Pile 10 HP Flange Face
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size no data in
Bolt Length no data in
Hardness Reading Scale B Scale
Hardness Reading Average 63.8
Spacing Ok

Test 7 of 7

DIME Test ID: 2020-08-27-7-7
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/03/2020
Date Tested: 09/03/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 6A
Rocap Number no data
Heat Number(s) Pile 8 HP Web
Mfg. Lot Number no data
Finish Coating Plain
Product Markings no data
Size no data in
Bolt Length no data in
Hardness Reading Scale B Scale
Hardness Reading Average 67.8
Spacing Ok

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.