Print Report | Back to Sample Detail

Sample Record for 2020-06-04-27

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214571 DEA: 020J1104 EFIS: 0219000062 QA Service Level: 1
DIST-CO-RTE-PM: 02-PLU-70-33.1/42.1
Work Description: PLACE HMA & SHOULDER BACKING, & REMOVE & REPLACE PAVEMENT DELINEATION.
Location Description: PLUMAS COUNTY AT AND NEAR KEDDIE FROM INDIAN CREEK BRIDGE TO 0.3 MILE WEST OF SPANISH CREEK BRIDGE NO. 09-0018
Contractor Name: Dig It Construction
Contractor Address: 803 Lorraine Dr, P.O. Box 494, Chester, CA 96020
Resident Engineer: Jeff Steppat Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-06-04-27
TL Number from the TL Form: 733199
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 06/04/2020
Date that the sample was received by the laboratory/organization performing the testing: 06/05/2020
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/4″ Sized Untreated Virgin Aggregate
From where was the sample collected: Source
Laboratory sample identification: D78458A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sierra Cascade Aggregate and Asphalt Products

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-32-0002
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Sized Untreated Aggregate Stockpile
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1 inch
The concrete mix design number: JMF 20-07-S1
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2020-06-04-27-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 08/14/2020
Date Tested: 06/06/2020
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 82.3 %
Cumulative percent passing the 1/2 in. sieve 2.6 %
Cumulative percent passing the 3/8 in. sieve 1.9 %
Cumulative percent passing the 1/4 in. sieve 1.6 %
Cumulative percent passing the #4 sieve 1.5 %
Cumulative percent passing the #8 sieve 1.4 %
Cumulative percent passing the #16 sieve 1.4 %
Cumulative percent passing the #30 sieve 1.4 %
Cumulative percent passing the #50 sieve 1.3 %
Cumulative percent passing the #100 sieve 1.2 %
Cumulative percent passing the #200 sieve 0.94 %