Print Report | Back to Sample Detail

Sample Record for 2020-07-27-22

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214314 DEA: 081F6904 EFIS: 0815000016 QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-79-0.0/15.6
Work Description: COLD PLANE AC PAVEMENT AND PLACE RHMA-G.
Location Description: RIVERSIDE COUNTY NEAR TEMECULA FROM SAN DIEGO COUNTY LINE TO 0.4 MILE EAST OF BUTTERFIELD STAGE ROAD
Contractor Name: All American Asphalt
Contractor Address: P.O. Box 2229, Corona CA, 92878
Resident Engineer: Osama Abdalla Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-07-27-22
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/27/2020
Date that the sample was received by the laboratory/organization performing the testing: 07/29/2020
The quantity of what the sample constitutes: 99.99 Tons out
A brief description of the sample: 3/4" RHMA-G PG64-16RB (0.5% LAS)
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AAA-Perris

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number: Unknown
Sublot number: Unknown
HMA Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2020-07-27-22-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/04/2020
Date Tested: 07/30/2020
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 7.67 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data