*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2020-07-31-3


Project Information

Project ID: 212596 DEA: 100L0204 EFIS: 1013000053 QA Service Level: 1
DIST-CO-RTE-PM: 10-SJ,STA-99-0.0-0.7:24.4-24.8
Work Description: Partial Bridge Replacement
Location Description: ON ROUTE 99 IN RIPON AT THE COUNTY LINE OF SAN JOAQUIN COUNTY AND STANISLAUS COUNTY AT THE STANISLAUS RIVER BRIDGES (29-0013L/R).
Contractor Name: MCM Construction Contractor Address: 6413 32ND STREET P.O. Box 620
Resident Engineer: Harminder Deol Structure Rep.: Samuel, George

Sample Information

DIME Sample ID: 2020-07-31-3
TL Number from the TL Form:
Sample Submitted By Organization: CT QASI - Sacramento Field Laboratory
Sample Organization Contact: (916) 227-7263
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 07/31/2020
Date that the sample was received by the laboratory/organization performing the testing: 08/06/2020
The quantity of what the sample constitutes: 755
A brief description of the sample: A325 ROCAP ASSEMBLY
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:

Material Information

Rocap Number(s): U88982
Heat Number(s): Bolt DL18107414 Nut 75076196 Washer 182006
Nut Mfg. Lot Number(s): 30842-S-75076196
Washer Mfg. Lot Number(s): D7353
Bolt Specification: ASTM A325
Bolt Length(s): 2-1/4"
Nut Specification: ASTM A 563-DH
Washer Specification: F436
Finish: HDG
Diameter/Size: 7/8"
Bolt Mfg. Lot Number: BG1493
Rocap Test Requirement(s):
Lubricant Requirements(s): Lubricated

Test Results

Test 1 of 33

DIME Test ID: 2020-07-31-3-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: Nut Proff
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1A30842-7507619672286Nut Profffsaylor
UTM 450kip
Temperature 72 f

Test Results

Test 2 of 33

DIME Test ID: 2020-07-31-3-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: Nut Proff
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1B30842-7507619672628Nut Profffsaylor
UTM 450kip
Temperature 72 f

Test Results

Test 3 of 33

DIME Test ID: 2020-07-31-3-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Gage Type Pass

Test Results

Test 4 of 33

DIME Test ID: 2020-07-31-3-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Gage Type Pass

Test Results

Test 5 of 33

DIME Test ID: 2020-07-31-3-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Gage Type Pass

Test Results

Test 6 of 33

DIME Test ID: 2020-07-31-3-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Gage Type Pass

Test Results

Test 7 of 33

DIME Test ID: 2020-07-31-3-7
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Gage Type Pass

Test Results

Test 8 of 33

DIME Test ID: 2020-07-31-3-8
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 308425-75076196
Finish Coating ASTM F2329 - Hot Dip
Product Markings U DH
Size .875 in
Gage Type Pass

Test Results

Test 9 of 33

DIME Test ID: 2020-07-31-3-9
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 308425-75076196
Finish Coating ASTM F2329 - Hot Dip
Product Markings U DH
Size .875 in
Gage Type Pass

Test Results

Test 10 of 33

DIME Test ID: 2020-07-31-3-10
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 308425-75076196
Finish Coating ASTM F2329 - Hot Dip
Product Markings U DH
Size .875 in
Gage Type Pass

Test Results

Test 11 of 33

DIME Test ID: 2020-07-31-3-11
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 308425-75076196
Finish Coating ASTM F2329 - Hot Dip
Product Markings U DH
Size .875 in
Gage Type Pass

Test Results

Test 12 of 33

DIME Test ID: 2020-07-31-3-12
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 308425-75076196
Finish Coating ASTM F2329 - Hot Dip
Product Markings U DH
Size .875 in
Gage Type Pass

Test Results

Test 13 of 33

DIME Test ID: 2020-07-31-3-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Measurement Average 3.98 mils

Test Results

Test 14 of 33

DIME Test ID: 2020-07-31-3-14
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Measurement Average 4.74 mils

Test Results

Test 15 of 33

DIME Test ID: 2020-07-31-3-15
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Measurement Average 3.91 mils

Test Results

Test 16 of 33

DIME Test ID: 2020-07-31-3-16
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Measurement Average 5.12 mils

Test Results

Test 17 of 33

DIME Test ID: 2020-07-31-3-17
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Measurement Average 4.33 mils

Test Results

Test 18 of 33

DIME Test ID: 2020-07-31-3-18
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 308425-75076196
Finish Coating ASTM F2329 - Hot Dip
Product Markings U DH
Size .875 in
Bolt Length no data in
Measurement Average 3.24 mils

Test Results

Test 19 of 33

DIME Test ID: 2020-07-31-3-19
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 308425-75076196
Finish Coating ASTM F2329 - Hot Dip
Product Markings U DH
Size .875 in
Bolt Length no data in
Measurement Average 3.84 mils

Test Results

Test 20 of 33

DIME Test ID: 2020-07-31-3-20
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 308425-75076196
Finish Coating ASTM F2329 - Hot Dip
Product Markings U DH
Size .875 in
Bolt Length no data in
Measurement Average 3.94 mils

Test Results

Test 21 of 33

DIME Test ID: 2020-07-31-3-21
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 308425-75076196
Finish Coating ASTM F2329 - Hot Dip
Product Markings U DH
Size .875 in
Bolt Length no data in
Measurement Average 4.73 mils

Test Results

Test 22 of 33

DIME Test ID: 2020-07-31-3-22
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 308425-75076196
Finish Coating ASTM F2329 - Hot Dip
Product Markings U DH
Size .875 in
Bolt Length no data in
Measurement Average 2.86 mils

Test Results

Test 23 of 33

DIME Test ID: 2020-07-31-3-23
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7353
Finish Coating ASTM F2329 - Hot Dip
Product Markings P F436
Size .875 in
Bolt Length no data in
Measurement Average 5.97 mils

Test Results

Test 24 of 33

DIME Test ID: 2020-07-31-3-24
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7353
Finish Coating ASTM F2329 - Hot Dip
Product Markings P F436
Size .875 in
Bolt Length no data in
Measurement Average 2.27 mils

Test Results

Test 25 of 33

DIME Test ID: 2020-07-31-3-25
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7353
Finish Coating ASTM F2329 - Hot Dip
Product Markings P F436
Size .875 in
Bolt Length no data in
Measurement Average 2.94 mils

Test Results

Test 26 of 33

DIME Test ID: 2020-07-31-3-26
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7353
Finish Coating ASTM F2329 - Hot Dip
Product Markings P F436
Size .875 in
Bolt Length no data in
Measurement Average 2.47 mils

Test Results

Test 27 of 33

DIME Test ID: 2020-07-31-3-27
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7353
Finish Coating ASTM F2329 - Hot Dip
Product Markings P F436
Size .875 in
Bolt Length no data in
Measurement Average 7.21 mils

Test Results

Test 28 of 33

DIME Test ID: 2020-07-31-3-28
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.85
Spacing Ok

Test Results

Test 29 of 33

DIME Test ID: 2020-07-31-3-29
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.32
Spacing Ok

Test Results

Test 30 of 33

DIME Test ID: 2020-07-31-3-30
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG1493
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA SL
Size .875 in
Bolt Length 2.250 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.52
Spacing Ok

Test Results

Test 31 of 33

DIME Test ID: 2020-07-31-3-31
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7353
Finish Coating ASTM F2329 - Hot Dip
Product Markings P F436
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 38.45
Spacing Ok

Test Results

Test 32 of 33

DIME Test ID: 2020-07-31-3-32
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7353
Finish Coating ASTM F2329 - Hot Dip
Product Markings P F436
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 40.2
Spacing Ok

Test Results

Test 33 of 33

DIME Test ID: 2020-07-31-3-33
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/12/2020
Date Tested: 08/06/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7353
Finish Coating ASTM F2329 - Hot Dip
Product Markings P F436
Size .875 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 38
Spacing Ok