*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2020-07-29-6


Project Information

Project ID: 208945 DEA: 07288604 EFIS: 0700021080 COOP: 074663 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-710-6.0-9.4
Work Description: Gerald Desmond Bridge Replacement - A Design Build project. IQA samples will be selected by Port/Caltrans representatives and sent to Translab for testing.
Location Description: Port of Long Beach (District 7)
Contractor Name: Shimmick/FCC/Impregilo (SFI) JV Contractor Address: 11 Golden Shore, Suite 330
Resident Engineer: Structure Rep.: ,

Sample Information

DIME Sample ID: 2020-07-29-6
TL Number from the TL Form:
Sample Submitted By Organization: CT QASI - Los Angeles Field Laboratory
Sample Organization Contact: (858) 285-5797
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 07/29/2020
Date that the sample was received by the laboratory/organization performing the testing: 08/07/2020
The quantity of what the sample constitutes: 706
A brief description of the sample: F3125 Grade F1852 (A325 TC) 1-8 x 5" Fastener
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:

Material Information

Rocap Number(s): 31431-10626880
Heat Number(s): 10626880
Nut Mfg. Lot Number(s): 31482-6215079303
Washer Mfg. Lot Number(s): D8443
Bolt Specification: A325
Bolt Length(s):
Nut Specification: A563 DH
Washer Specification: F436
Finish: Mech Galv
Diameter/Size:
Bolt Mfg. Lot Number: 31431-10626880
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 27

DIME Test ID: 2020-07-29-6-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: A325 Wedge Tensile
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
1A31431-106268801.000095757425.9510.00A325 Wedge Tensilespaine
UTM 450kip
Temperature no data

Test Results

Test 2 of 27

DIME Test ID: 2020-07-29-6-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: A325 Wedge Tensile
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
1B31431-106268801.000096209427.9610.00A325 Wedge Tensilespaine
UTM 450kip
Temperature no data

Test Results

Test 3 of 27

DIME Test ID: 2020-07-29-6-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: Nut Proof Load
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1A31482-6215079303109500Nut Proof Loadspaine
UTM 450kip
Temperature 72 f

Test Results

Test 4 of 27

DIME Test ID: 2020-07-29-6-4
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: Nut Proof Load
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1B31482-6215079303109695Nut Proof Loadspaine
UTM 450kip
Temperature 72 f

Test Results

Test 5 of 27

DIME Test ID: 2020-07-29-6-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31431-10626880
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size 1 in
Bolt Length 5 in
Gage Type Pass

Test Results

Test 6 of 27

DIME Test ID: 2020-07-29-6-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31431-10626880
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size 1 in
Bolt Length 5 in
Gage Type Pass

Test Results

Test 7 of 27

DIME Test ID: 2020-07-29-6-7
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31431-10626880
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size 1 in
Bolt Length 5 in
Gage Type Pass

Test Results

Test 8 of 27

DIME Test ID: 2020-07-29-6-8
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31431-10626880
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size 1 in
Bolt Length 5 in
Gage Type Pass

Test Results

Test 9 of 27

DIME Test ID: 2020-07-29-6-9
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31431-10626880
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size 1 in
Bolt Length 5 in
Gage Type Pass

Test Results

Test 10 of 27

DIME Test ID: 2020-07-29-6-15
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31431-10626880
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size 1 in
Bolt Length 5 in
Measurement Average 2.9 mils

Test Results

Test 11 of 27

DIME Test ID: 2020-07-29-6-16
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31431-10626880
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size 1 in
Bolt Length 5 in
Measurement Average 2.44 mils

Test Results

Test 12 of 27

DIME Test ID: 2020-07-29-6-17
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31431-10626880
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size 1 in
Bolt Length 5 in
Measurement Average 3.48 mils

Test Results

Test 13 of 27

DIME Test ID: 2020-07-29-6-18
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31431-10626880
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size 1 in
Bolt Length 5 in
Measurement Average 3.18 mils

Test Results

Test 14 of 27

DIME Test ID: 2020-07-29-6-19
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31431-10626880
Finish Coating ASTM B695 - Mech Galv
Product Markings A325TC USA
Size 1 in
Bolt Length 5 in
Measurement Average 3.3 mils

Test Results

Test 15 of 27

DIME Test ID: 2020-07-29-6-20
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31482-6215079303
Finish Coating ASTM B695 - Mech Galv
Product Markings DH3 U
Size 1 in
Bolt Length no data in
Measurement Average 2.29 mils

Test Results

Test 16 of 27

DIME Test ID: 2020-07-29-6-21
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31482-6215079303
Finish Coating ASTM B695 - Mech Galv
Product Markings DH3 U
Size 1 in
Bolt Length no data in
Measurement Average 4.49 mils

Test Results

Test 17 of 27

DIME Test ID: 2020-07-29-6-22
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31482-6215079303
Finish Coating ASTM B695 - Mech Galv
Product Markings DH3 U
Size 1 in
Bolt Length no data in
Measurement Average 2.22 mils

Test Results

Test 18 of 27

DIME Test ID: 2020-07-29-6-23
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31482-6215079303
Finish Coating ASTM B695 - Mech Galv
Product Markings DH3 U
Size 1 in
Bolt Length no data in
Measurement Average 2.13 mils

Test Results

Test 19 of 27

DIME Test ID: 2020-07-29-6-24
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31482-6215079303
Finish Coating ASTM B695 - Mech Galv
Product Markings DH3 U
Size 1 in
Bolt Length no data in
Measurement Average 7.27 mils

Test Results

Test 20 of 27

DIME Test ID: 2020-07-29-6-25
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D8443
Finish Coating ASTM B695 - Mech Galv
Product Markings F436-3 P
Size 1 in
Bolt Length no data in
Measurement Average 3.62 mils

Test Results

Test 21 of 27

DIME Test ID: 2020-07-29-6-26
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D8443
Finish Coating ASTM B695 - Mech Galv
Product Markings F436-3 P
Size 1 in
Bolt Length no data in
Measurement Average 3.37 mils

Test Results

Test 22 of 27

DIME Test ID: 2020-07-29-6-27
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D8443
Finish Coating ASTM B695 - Mech Galv
Product Markings F436-3 P
Size 1 in
Bolt Length no data in
Measurement Average 2.89 mils

Test Results

Test 23 of 27

DIME Test ID: 2020-07-29-6-28
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D8443
Finish Coating ASTM B695 - Mech Galv
Product Markings F436-3 P
Size 1 in
Bolt Length no data in
Measurement Average 3.5 mils

Test Results

Test 24 of 27

DIME Test ID: 2020-07-29-6-29
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D8443
Finish Coating ASTM B695 - Mech Galv
Product Markings F436-3 P
Size 1 in
Bolt Length no data in
Measurement Average 4.47 mils

Test Results

Test 25 of 27

DIME Test ID: 2020-07-29-6-30
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D8443
Finish Coating ASTM B695 - Mech Galv
Product Markings F436-3 P
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 40
Spacing Ok

Test Results

Test 26 of 27

DIME Test ID: 2020-07-29-6-31
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D8443
Finish Coating ASTM B695 - Mech Galv
Product Markings F436-3 P
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 40.5
Spacing Ok

Test Results

Test 27 of 27

DIME Test ID: 2020-07-29-6-32
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/17/2020
Date Tested: 08/13/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D8443
Finish Coating ASTM B695 - Mech Galv
Product Markings F436-3 P
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 40.4
Spacing Ok