Print Report | Back to Sample Detail

Sample Record for 2020-07-28-5

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213737 DEA: 07289104 EFIS: 0700021123 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-405-11.9/13.2
Work Description: Rehabilitate the existing Commercial Vehicle Enforcement Facility.
Location Description: LOS ANGELES COUNTY IN CARSON FROM DEL AMO BOULEVARD OVER CROSSING TO VERMONT AVENUE (190TH) UNDER CROSSING.
Contractor Name: POWELL CONSTRUCTORS, INC.
Contractor Address: 8555 Banana Avenue, Fontana, CA 92335
Resident Engineer: Samuel Gallardo Structure Rep.: Bernabe Contreras Jr

Sample Information

DIME Sample ID: 2020-07-28-5
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 07/28/2020
Date that the sample was received by the laboratory/organization performing the testing: 07/03/2020
The quantity of what the sample constitutes: 74
A brief description of the sample: 5/8-11x1 1/2" A325 HVY HX Bolts, Plain
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Nucor

Material Information

Rocap Number(s): B416144A N425659A WD8070
Heat Number(s): 100890613
Nut Mfg. Lot Number(s): n/a
Washer Mfg. Lot Number(s): n/a
Bolt Specification: ASTM A325
Bolt Length(s): 1 1/2"
Nut Specification: n/a
Washer Specification: n/a
Finish: Plain
Diameter/Size: 5/8-11"
Bolt Mfg. Lot Number: 416144A
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 5

DIME Test ID: 2020-07-28-5-1
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/06/2020
Date Tested: 08/05/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416144A
Finish Coating Plain
Product Markings A325 USA N
Size .625 in
Bolt Length 1.5 in
Gage Type Pass

Test 2 of 5

DIME Test ID: 2020-07-28-5-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/06/2020
Date Tested: 08/05/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416144A
Finish Coating Plain
Product Markings A325 USA N
Size .625 in
Bolt Length 1.5 in
Gage Type Pass

Test 3 of 5

DIME Test ID: 2020-07-28-5-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/06/2020
Date Tested: 08/05/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416144A
Finish Coating Plain
Product Markings A325 USA N
Size .625 in
Bolt Length 1.5 in
Gage Type Pass

Test 4 of 5

DIME Test ID: 2020-07-28-5-4
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/06/2020
Date Tested: 08/05/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416144A
Finish Coating Plain
Product Markings A325 USA N
Size .625 in
Bolt Length 1.5 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.67
Spacing Ok

Test 5 of 5

DIME Test ID: 2020-07-28-5-5
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/06/2020
Date Tested: 08/05/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 416144A
Finish Coating Plain
Product Markings A325 USA N
Size .625 in
Bolt Length 1.5 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.87
Spacing Ok