Print Report | Back to Sample Detail

Sample Record for 2020-07-24-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 9999 DEA: 00000000 EFIS: 0000000000 COOP: 99999333399 MINOR: 333333 Permit Numbers: 555555 0400NRT0000 QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC,OMG-888,99,80-0.6-0.6
Work Description: THIS PROJECT RECORD WAS ADDED FOR DIME DEVELOPERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description: THIS PROJECT RECORD WAS ADDED FOR DIME DEVELOPERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Contractor Name: YYZ
Contractor Address: 1234 address, Sacramento, CA 95824
Resident Engineer: RE_first RE_last Structure Rep.: SR_Last, SR_First

Sample Information

DIME Sample ID: 2020-07-24-3
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - DME / District Lab
Sample Organization Contact: (510) 507-3456
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 07/24/2020
Date that the sample was received by the laboratory/organization performing the testing: 07/24/2020
The quantity of what the sample constitutes: 6 bags of virgin aggregate
A brief description of the sample: 1/2" Aggregate for HMA
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Teichert Vernalis

Material Information

Source Identification (SMARA or name of Pit): 91-39-0041
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Results

Test 1 of 1

DIME Test ID: 2020-07-24-3-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 07/28/2020
Date Tested: 07/24/2020
Submitted By Organization: CT D04 - DME / District Lab
Organization Address: 21339 Cabot Blvd,
Organization City: Hayward
Organization State: CA
Organization Zipcode: 94545
Organization Email: mohammad.dehghan@dot.ca.gov
Organization Phone: (510) 507-3456
General Comments for this Test: Test for Training
Additional Comments When Verified: alex.liu@dot.ca.gov
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) No
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 95.2 %
Cumulative percent passing the 3/8 in. sieve 78.1 %
Cumulative percent passing the #4 sieve 59.2 %
Cumulative percent passing the #8 sieve 43.4 %
Cumulative percent passing the #16 sieve 28.1 %
Cumulative percent passing the #30 sieve 17.8 %
Cumulative percent passing the #50 sieve 10.9 %
Cumulative percent passing the #100 sieve 6 %
Cumulative percent passing the #200 sieve 3.5 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.