*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2020-07-22-4


Project Information

Project ID: 88888 DEA: STOCK EFIS: STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Contractor Address:
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-07-22-4
TL Number from the TL Form:
Sample Submitted By Organization: CT QASI - Los Angeles Field Laboratory
Sample Organization Contact: (858) 285-5797
Type of Sample: Stock
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 07/22/2020
Date that the sample was received by the laboratory/organization performing the testing: 07/27/2020
The quantity of what the sample constitutes: 48
A brief description of the sample: 3/4"-10 x 15" Anchor bolt assemblies
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:

Material Information

Rocap Number(s):
Heat Number(s): Bolt 58035126-03 Nuts 6215104903 Washers 189090
Nut Mfg. Lot Number(s): 31662-6215104903
Washer Mfg. Lot Number(s): 314460
Bolt Specification: ASTM A1554 Gr. 55-S1
Bolt Length(s): 15" with 2" hook
Nut Specification: ASTM A194 Gr. 2H
Washer Specification: ASTM F436
Finish: HDG
Diameter/Size: 3/4"
Bolt Mfg. Lot Number: 50237-PPO
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 13

DIME Test ID: 2020-07-22-4-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 08/03/2020
Date Tested: 07/29/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Number of Samples 1
SampleHeat NumberDiameter (in)Area (sqin)Stress at Offset (psi)Tensile Strength (psi)Elongation in 4 x d (%)Tested By
158035126-030.350.096651089192630.8spaine
UTM 67kip
Temperature 72 f

Test Results

Test 2 of 13

DIME Test ID: 2020-07-22-4-2
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 08/03/2020
Date Tested: 07/29/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Number of Samples 1
SampleHeat NumberDiameter (in)Area (sqin)Stress at Offset (psi)Tensile Strength (psi)Elongation in 4 x d (%)Tested By
258035126-030.3510.097649999097929.4spaine
UTM 67kip
Temperature 72 f

Test Results

Test 3 of 13

DIME Test ID: 2020-07-22-4-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 08/03/2020
Date Tested: 07/30/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: Nut Proof Load
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
1A31662-621510490358630Nut Proof Loadspaine
UTM 400kip
Temperature 72 f

Test Results

Test 4 of 13

DIME Test ID: 2020-07-22-4-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 08/03/2020
Date Tested: 07/30/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 58035126-03
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings YELLOW PAINT
Size .75 in
Bolt Length 15 in
Gage Type Pass

Test Results

Test 5 of 13

DIME Test ID: 2020-07-22-4-5
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 08/03/2020
Date Tested: 07/30/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31662-6215104903
Finish Coating ASTM F2329 - Hot Dip
Product Markings 2HZN U
Size .75 in
Gage Type Pass

Test Results

Test 6 of 13

DIME Test ID: 2020-07-22-4-6
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 08/03/2020
Date Tested: 07/30/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31662-6215104903
Finish Coating ASTM F2329 - Hot Dip
Product Markings 2HZN U
Size .75 in
Gage Type Pass

Test Results

Test 7 of 13

DIME Test ID: 2020-07-22-4-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/03/2020
Date Tested: 07/30/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 58035126-03
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings YELLOW PAINT
Size .75 in
Bolt Length 15 in
Measurement Average 3.44 mils

Test Results

Test 8 of 13

DIME Test ID: 2020-07-22-4-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/03/2020
Date Tested: 07/30/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31662-6215104903
Finish Coating ASTM F2329 - Hot Dip
Product Markings 2HZN U
Size .75 in
Bolt Length no data in
Measurement Average 5.78 mils

Test Results

Test 9 of 13

DIME Test ID: 2020-07-22-4-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/03/2020
Date Tested: 07/30/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 31662-6215104903
Finish Coating ASTM F2329 - Hot Dip
Product Markings 2HZN U
Size .75 in
Bolt Length no data in
Measurement Average 3.87 mils

Test Results

Test 10 of 13

DIME Test ID: 2020-07-22-4-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/03/2020
Date Tested: 07/30/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 314460
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .75 in
Bolt Length no data in
Measurement Average 3.1 mils

Test Results

Test 11 of 13

DIME Test ID: 2020-07-22-4-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/03/2020
Date Tested: 07/30/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 314460
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .75 in
Bolt Length no data in
Measurement Average 3.75 mils

Test Results

Test 12 of 13

DIME Test ID: 2020-07-22-4-12
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/03/2020
Date Tested: 07/30/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 314460
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .75 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 40.85
Spacing Ok

Test Results

Test 13 of 13

DIME Test ID: 2020-07-22-4-13
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/03/2020
Date Tested: 07/30/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 314460
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size .75 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 42.05
Spacing Ok