Print Report | Back to Sample Detail

Sample Record for 2020-07-13-35

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214388 DEA: 051F6804 EFIS: 0514000046 QA Service Level: 1
DIST-CO-RTE-PM: 05-MON-1-39.8/74.6
Work Description: RHMA OVERLAY ON EXISTING ROADWAY AND REPLACE GUARDRAIL.
Location Description: MONTEREY COUNTY FROM TORRE CANYON BRIDGE NEAR BIG SUR TO SAN LUIS AVENUE IN CARMEL
Contractor Name: Graniterock Company
Contractor Address: 5225 Hellyer Ave, Ste 200, San Jose, CA 95138
Resident Engineer: Rodger Johnson Structure Rep.: David Galarza

Sample Information

DIME Sample ID: 2020-07-13-35
TL Number from the TL Form:
Sample Submitted By Organization: CT D05 - San Luis Obispo District Laboratory
Sample Organization Contact: (559) 230-3109
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/13/2020
Date that the sample was received by the laboratory/organization performing the testing: 07/15/2020
The quantity of what the sample constitutes: 2 boxes
A brief description of the sample: 1/2" RHMA-G
From where was the sample collected: Manufacturer
Laboratory sample identification: 20-A-142
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Graniterock Aromas Batch plant

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number: 1
Sublot number: 5
HMA Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2020-07-13-35-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 07/21/2020
Date Tested: 07/17/2020
Submitted By Organization: CT D05 - San Luis Obispo District Laboratory
Organization Address: 50 Higuera Street,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: glenn.johnson@dot.ca.gov
Organization Phone: (805) 549-3158
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 8.23 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data