Sample Record for 2020-07-13-12
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 212777 DEA: 021H1104 EFIS: 0215000106
QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS-299-25.58/25.58
Work Description: BUILDING WORK.
Location Description: LASSEN COUNTY ABOUT 11 MILES EAST OF BIEBER AT THE ADIN MAINTENANCE STATION
Contractor Name: Walsh Construction Company II, LLC (Walsh)
Contractor Address: 1390 Willow Pass Road Suite 950, Concord, CA 94520
Resident Engineer: Mike Zdenek Structure Rep.: Chris Brace
Sample Information
DIME Sample ID: 2020-07-13-12
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 07/13/2020
Date that the sample was received by the laboratory/organization performing the testing: 07/17/2020
The quantity of what the sample constitutes: 64
A brief description of the sample: ASTM A325 HVY HEX HDG Bolt
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: C and K Johnson Industries
Material Information
Rocap Number(s): B 413230A, N 413063C, W D8070
Heat Number(s): 100892132
Nut Mfg. Lot Number(s): n/a
Washer Mfg. Lot Number(s): n/a
Bolt Specification: ASTM A325
Bolt Length(s): 4-1/2"
Nut Specification: n/a
Washer Specification: n/a
Finish: ASTM A153
Diameter/Size: 5/8 - 11 x 4-1/2"
Bolt Mfg. Lot Number: 413230A
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test Results
Test 1 of 7
DIME Test ID: 2020-07-13-12-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 07/29/2020
Date Tested: 07/24/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | 1 | 413230A | 0.6250 | 31929 | 142.03 | 10.00 | | bewing |
| |
UTM
|
450kip
|
Temperature
|
no data
|
Test 2 of 7
DIME Test ID: 2020-07-13-12-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 07/29/2020
Date Tested: 07/29/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
413230A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A325 N USA
|
Size
|
.625 in
|
Bolt Length
|
4.5 in
|
Gage Type
|
Pass
|
Test 3 of 7
DIME Test ID: 2020-07-13-12-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 07/29/2020
Date Tested: 07/29/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
413230A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A325 N USA
|
Size
|
.625 in
|
Bolt Length
|
4.5 in
|
Gage Type
|
Pass
|
Test 4 of 7
DIME Test ID: 2020-07-13-12-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 07/29/2020
Date Tested: 07/29/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
413230A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A325 N USA
|
Size
|
.625 in
|
Bolt Length
|
4.5 in
|
Gage Type
|
Pass
|
Test 5 of 7
DIME Test ID: 2020-07-13-12-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 07/29/2020
Date Tested: 07/29/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
413230A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A325 N USA
|
Size
|
.625 in
|
Bolt Length
|
4.5 in
|
Measurement Average
|
4.95 mils
|
Test 6 of 7
DIME Test ID: 2020-07-13-12-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 07/29/2020
Date Tested: 07/29/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
413230A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A325 N USA
|
Size
|
.625 in
|
Bolt Length
|
4.5 in
|
Measurement Average
|
3.76 mils
|
Test 7 of 7
DIME Test ID: 2020-07-13-12-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 07/29/2020
Date Tested: 07/29/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
413230A
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
Product Markings
|
A325 N USA
|
Size
|
.625 in
|
Bolt Length
|
4.5 in
|
Measurement Average
|
4.67 mils
|