Print Report | Back to Sample Detail

Sample Record for 2020-07-13-6

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-07-13-6
TL Number from the TL Form: C827327
Sample Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 07/13/2020
Date that the sample was received by the laboratory/organization performing the testing: 07/13/2020
The quantity of what the sample constitutes: 6 bags
A brief description of the sample: Treated aggregate blend
From where was the sample collected: Source
Laboratory sample identification: 20-HMA-0114
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Teichert Materials Tracy

Material Information

Source Identification (SMARA or name of Pit): 91-39-0021
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt Cut
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Results

Test 1 of 1

DIME Test ID: 2020-07-13-6-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 07/16/2020
Date Tested: 07/16/2020
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) No
Total mass of material in the sample 5741.9 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 36.5 grams
Cumulative mass retained on the 1/2 in. sieve 927.3 grams
Cumulative mass retained on the 3/8 in. sieve 2012.2 grams
Cumulative mass retained on the #4 sieve 3319.6 grams
Total sample mass passing the #4 sieve 2410.7 grams
Total mass of fine material in the sample 601.2 grams
Cumulative mass retained on the #8 sieve 156.8 grams
Cumulative mass retained on the #16 sieve 316.7 grams
Cumulative mass retained on the #30 sieve 418.9 grams
Cumulative mass retained on the #50 sieve 480.8 grams
Cumulative mass retained on the #100 sieve 527.9 grams
Cumulative mass retained on the #200 sieve 551.7 grams
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 99.4 %
Cumulative percent passing the 1/2 in. sieve 83.9 %
Cumulative percent passing the 3/8 in. sieve 65 %
Cumulative percent passing the #4 sieve 42.2 %
Cumulative percent passing the #8 sieve 31.2 %
Cumulative percent passing the #16 sieve 20 %
Cumulative percent passing the #30 sieve 12.8 %
Cumulative percent passing the #50 sieve 8.5 %
Cumulative percent passing the #100 sieve 5.1 %
Cumulative percent passing the #200 sieve 3.47 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.