Print Report | Back to Sample Detail

Sample Record for 2020-05-21-33

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214725 DEA: 020J1304 EFIS: 0219000064 QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS-139-43.0/53.0
Work Description: COLD IN-PLACE RECYCLING AND PLACE HMA (TYPE A).
Location Description: LASSEN COUNTY ABOUT 42 MILES NORTH OF SUSANVILLE FROM 3.8 MILES NORTH OF SLATE CREEK TO 4.7 MILES SOUTH OF WILLOW CREEK RANCH ROAD
Contractor Name: HAT CREEK CONSTRUCTION & MATERIALS, INC.
Contractor Address: 24339 STATE HIGHWAY 89 N.;, BURNEY CA 96013
Resident Engineer: Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-05-21-33
TL Number from the TL Form: 733194
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 05/21/2020
Date that the sample was received by the laboratory/organization performing the testing: 05/22/2020
The quantity of what the sample constitutes: JMF Verification Renewal
A brief description of the sample: Crusher Dust Untreated Sized Virgin Aggregate
From where was the sample collected: Source
Laboratory sample identification: D78440D
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Shaw Pit

Material Information

Source Identification (SMARA or name of Pit): 91-25-0008
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Untreated Sized Aggregate Stockpile
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/4 inch
The concrete mix design number: JMF 19-05-R1
Lot number: Unknown
Sublot number: Unknown

Test Results

Test 1 of 2

DIME Test ID: 2020-05-21-33-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 07/13/2020
Date Tested: 05/23/2020
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Total mass of material in the sample 507.2 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 0 grams
Cumulative mass retained on the 1/2 in. sieve 0 grams
Cumulative mass retained on the 3/8 in. sieve 0 grams
Mass retained on the 1/4 in. sieve 0 grams
Cumulative mass retained on the #4 sieve 48.4 grams
Total sample mass passing the #4 sieve 458.8 grams
Total mass of fine material in the sample 458.8 grams
Cumulative mass retained on the #8 sieve 169.5 grams
Cumulative mass retained on the #16 sieve 269.9 grams
Cumulative mass retained on the #30 sieve 325.8 grams
Cumulative mass retained on the #50 sieve 357.2 grams
Cumulative mass retained on the #100 sieve 378.8 grams
Cumulative mass retained on the #200 sieve 393.6 grams
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 100 %
Cumulative percent passing the 1/4 in. sieve 100 %
Cumulative percent passing the #4 sieve 90.5 %
Cumulative percent passing the #8 sieve 57.1 %
Cumulative percent passing the #16 sieve 37.3 %
Cumulative percent passing the #30 sieve 26.2 %
Cumulative percent passing the #50 sieve 20 %
Cumulative percent passing the #100 sieve 15.8 %
Cumulative percent passing the #200 sieve 12.86 %

Test 2 of 2

DIME Test ID: 2020-05-21-33-2
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Verified Date: 08/05/2020
Date Tested: 08/05/2020
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Size of aggregate being tested Fine Aggregate
What type of solution was used? Sodium sulfate
What was the condition of the solution? Previously used
Number of immersion cycles performed 5
Fine weighted average loss 7.4 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.