Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 214691 DEA: 060Y0804 EFIS: 0619000242
QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE-41-R0.0/M6.1
Work Description: COLD PLANE AC PAVEMENT, HMA (TYPE A) & RHMA-GAP GRADED (BWC) OVERLAY.
Location Description: FRESNO COUNTY NEAR LEMOORE FROM EXCELSIOR AVENUE TO ELKHORN AVENUE
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 2716 Granite Court, Fresno, CA 93706
Resident Engineer: Donald Hiura Structure Rep.: Unknown
DIME Sample ID: 2020-05-15-27
TL Number from the TL Form: 027481
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 05/15/2020
Date that the sample was received by the laboratory/organization performing the testing: 06/24/2020
The quantity of what the sample constitutes: 1 Can, #1 Test, 2 (27485), 3 (27489)
A brief description of the sample: TEST Asphalt Binder
From where was the sample collected: Source
Laboratory sample identification: AB206060
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: San Joaquin Refining Co Inc
Performance Grade: PG 64-16
Modified: No
Lot number: Unknown
Sublot number: Unknown
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier:
Multigrade:
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2020-05-15-27-1
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 07/06/2020
Date Tested: 07/06/2020
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Is mass change based on one or two containers?
|
One
|
Any material loss from containers during heating process/testing?
|
Yes
|
Mass of empty container #1
|
171.630 grams
|
Mass of container #1 before test (m1i)
|
206.700 grams
|
Mass of container #1 after test (m1f)
|
206.690 grams
|
Average mass change
|
-0.029 percent
|