Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 213596 DEA: 051C8904 EFIS: 0513000009
QA Service Level: 1
DIST-CO-RTE-PM: 05-MON-101-87.3/R91.5
Work Description: PRECAST CONC PVMT, CRACK AND SEAT PAVEMENT AND RECONSTRUCT RAMPS.
Location Description: MONTEREY COUNTY IN SALINAS FROM EAST MARKET STREET UNDERCROSSING TO 0.3 MILE SOUTH OF ESPINOSA ROAD
Contractor Name: Granite Rock Company
Contractor Address: 411 Walker Street, Watsonville, CA 95076
Resident Engineer: Tyler Lavering Structure Rep.: Juan Moreno
DIME Sample ID: 2020-05-19-33
TL Number from the TL Form: 686201
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Department Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 05/19/2020
Date that the sample was received by the laboratory/organization performing the testing: 05/27/2020
The quantity of what the sample constitutes: 1 Can
A brief description of the sample: Asphalt Binder Sample
From where was the sample collected: Distributor
Laboratory sample identification: AB206020
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: San Joaquin Refinery
Performance Grade: PG64-10
Modified: No
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier:
Multigrade:
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2020-05-19-33-1
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 06/19/2020
Date Tested: 06/19/2020
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Is mass change based on one or two containers?
|
One
|
Any material loss from containers during heating process/testing?
|
No
|
Mass of empty container #1
|
166.791 grams
|
Mass of container #1 before test (m1i)
|
202.085 grams
|
Mass of container #1 after test (m1f)
|
202.017 grams
|
Average mass change
|
-0.193 percent
|