Print Report | Back to Sample Detail

Sample Record for 2013-11-12-7559583

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 10016 DEA: 06342524 EFIS: 0600000381 QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE-180-R71.8/74.5
Work Description: NEW EXPRESS HIGHWAY
Location Description: FRESNO COUNTY ABOUT 6.3 MILES EAST OF FRESNO FROM 0.6 MILE WEST OF QUALITY AVENUE TO 0.2 MILE WEST OF SMITH AVENUE
Contractor Name: American Paving Co
Contractor Address: 315 North Thorne Avenue, Fresno, CA 93706
Resident Engineer: Mark Mengoni Structure Rep.: Mike Bloom

Sample Information

DIME Sample ID: 2013-11-12-7559583
TL Number from the TL Form:
Sample Submitted By Organization: Trinity Engineering Laboratories, Incorporated - Fresno
Sample Organization Contact: (559) 292-2188
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 11/12/2013
Date that the sample was received by the laboratory/organization performing the testing: 11/13/2013
The quantity of what the sample constitutes: 7 Concrete Cylinders
A brief description of the sample: 6x12 concrete cylindes at 19 yards
From where was the sample collected: Source
Laboratory sample identification: 2013-11-12-07-55-9583
Structure unique identifier: retaining wall for fowler switch canal
Structure name: Newmark Road Canal
The fabricator/manufacturer/facility name: Newmark Rd Canal

Material Information

The concrete mix design number: ND22023
The truck number from where the sample was collected: 107186-3983
The batch plant ticket number from where the sample was collected: 111106751
Concrete batch plant: 111
The fabricator/manufacturer designation for the sample: Builders Concrete Ready Mix Plant Sanger
A detailed description of where the material sample was collected: The hopper of the concrete pump
Where the material sample would have been placed if not sampled: The hopper of the concrete pump
From Lot No.:
Bag Lot No.:

Test Results

Test 1 of 4

DIME Test ID: 2013-11-12-7559583-1
Test Method: ASTM C143-10a: Standard Test Method for Slump of Hydraulic-Cement Concrete
Submitted By Organization: Trinity Engineering Laboratories, Incorporated - Fresno
Organization Address: 2473 North Sunnyside Avenue,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email: mhorn@trinityeng.co
Organization Phone: (559) 260-6841
Data has not been verified.

Test 2 of 4

DIME Test ID: 2013-11-12-7559583-2
Test Method: ASTM C138-10b: Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
Submitted By Organization: Trinity Engineering Laboratories, Incorporated - Fresno
Organization Address: 2473 North Sunnyside Avenue,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email: mhorn@trinityeng.co
Organization Phone: (559) 260-6841
Data has not been verified.

Test 3 of 4

DIME Test ID: 2013-11-12-7559583-3
Test Method: ASTM C1064-08: Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
Submitted By Organization: Trinity Engineering Laboratories, Incorporated - Fresno
Organization Address: 2473 North Sunnyside Avenue,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email: mhorn@trinityeng.co
Organization Phone: (559) 260-6841
Data has not been verified.

Test 4 of 4

DIME Test ID: 2013-11-12-7559583-4
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
Submitted By Organization: Trinity Engineering Laboratories, Incorporated - Fresno
Organization Address: 2473 North Sunnyside Avenue,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93727
Organization Email: mhorn@trinityeng.co
Organization Phone: (559) 260-6841
Data has not been verified.