*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2020-06-08-22


Project Information

Project ID: 88888 DEA: STOCK EFIS: STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Contractor Address:
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-06-08-22
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 06/08/2020
Date that the sample was received by the laboratory/organization performing the testing: 06/15/2020
The quantity of what the sample constitutes: 300
A brief description of the sample: A325 Bolt
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:

Material Information

Rocap Number(s):
Heat Number(s):
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: A325
Bolt Length(s): 1.75
Nut Specification: NA
Washer Specification: NA
Finish: HDG
Diameter/Size: .75
Bolt Mfg. Lot Number: 432423A
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 13

DIME Test ID: 2020-06-08-22-1
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Gage Type Pass

Test Results

Test 2 of 13

DIME Test ID: 2020-06-08-22-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Gage Type Pass

Test Results

Test 3 of 13

DIME Test ID: 2020-06-08-22-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Gage Type Pass

Test Results

Test 4 of 13

DIME Test ID: 2020-06-08-22-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Gage Type Pass

Test Results

Test 5 of 13

DIME Test ID: 2020-06-08-22-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Gage Type Pass

Test Results

Test 6 of 13

DIME Test ID: 2020-06-08-22-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Measurement Average 2.96 mils

Test Results

Test 7 of 13

DIME Test ID: 2020-06-08-22-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Measurement Average 4.67 mils

Test Results

Test 8 of 13

DIME Test ID: 2020-06-08-22-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Measurement Average 4.78 mils

Test Results

Test 9 of 13

DIME Test ID: 2020-06-08-22-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Measurement Average 5.42 mils

Test Results

Test 10 of 13

DIME Test ID: 2020-06-08-22-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Measurement Average 2.95 mils

Test Results

Test 11 of 13

DIME Test ID: 2020-06-08-22-11
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Hardness Reading Scale C Scale
Hardness Reading Average 32.45
Spacing Ok

Test Results

Test 12 of 13

DIME Test ID: 2020-06-08-22-12
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.3
Spacing Ok

Test Results

Test 13 of 13

DIME Test ID: 2020-06-08-22-13
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 432423A
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 USA N
Size .75 in
Bolt Length 1.75 in
Hardness Reading Scale C Scale
Hardness Reading Average 31.65
Spacing Ok