*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2020-06-09-13


Project Information

Project ID: 88888 DEA: STOCK EFIS: STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Contractor Address:
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-06-09-13
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 06/09/2020
Date that the sample was received by the laboratory/organization performing the testing: 06/15/2020
The quantity of what the sample constitutes: 57
A brief description of the sample: A325 Fastener Assembly
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:

Material Information

Rocap Number(s):
Heat Number(s):
Nut Mfg. Lot Number(s): 30717-6214953302
Washer Mfg. Lot Number(s): D6918
Bolt Specification: A325
Bolt Length(s): 2.25
Nut Specification: A563
Washer Specification: F436
Finish: MG
Diameter/Size: 1
Bolt Mfg. Lot Number: BM0196
Rocap Test Requirement(s):
Lubricant Requirements(s):

Test Results

Test 1 of 20

DIME Test ID: 2020-06-09-13-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: Nut Proof
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
130717-621495330294198Nut Proofbewing
UTM 450kip
Temperature 72 f

Test Results

Test 2 of 20

DIME Test ID: 2020-06-09-13-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0196
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size 1 in
Bolt Length 2.25 in
Gage Type Pass

Test Results

Test 3 of 20

DIME Test ID: 2020-06-09-13-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0196
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size 1 in
Bolt Length 2.25 in
Gage Type Pass

Test Results

Test 4 of 20

DIME Test ID: 2020-06-09-13-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0196
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size 1 in
Bolt Length 2.25 in
Gage Type Pass

Test Results

Test 5 of 20

DIME Test ID: 2020-06-09-13-6
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 30717-6214953302
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size 1 in
Gage Type Pass

Test Results

Test 6 of 20

DIME Test ID: 2020-06-09-13-7
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 30717-6214953302
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size 1 in
Gage Type Pass

Test Results

Test 7 of 20

DIME Test ID: 2020-06-09-13-8
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 30717-6214953302
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size 1 in
Gage Type Pass

Test Results

Test 8 of 20

DIME Test ID: 2020-06-09-13-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0196
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size 1 in
Bolt Length 2.25 in
Measurement Average 6.25 mils

Test Results

Test 9 of 20

DIME Test ID: 2020-06-09-13-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0196
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size 1 in
Bolt Length 2.25 in
Measurement Average 3.93 mils

Test Results

Test 10 of 20

DIME Test ID: 2020-06-09-13-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0196
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size 1 in
Bolt Length 2.25 in
Measurement Average 7.01 mils

Test Results

Test 11 of 20

DIME Test ID: 2020-06-09-13-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 30717-6214953302
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size 1 in
Bolt Length no data in
Measurement Average 4.06 mils

Test Results

Test 12 of 20

DIME Test ID: 2020-06-09-13-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 30717-6214953302
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size 1 in
Bolt Length no data in
Measurement Average 2.68 mils

Test Results

Test 13 of 20

DIME Test ID: 2020-06-09-13-14
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 30717-6214953302
Finish Coating ASTM B695 - Mech Galv
Product Markings U DH
Size 1 in
Bolt Length no data in
Measurement Average 3.72 mils

Test Results

Test 14 of 20

DIME Test ID: 2020-06-09-13-15
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6918
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1 in
Bolt Length no data in
Measurement Average 2.22 mils

Test Results

Test 15 of 20

DIME Test ID: 2020-06-09-13-16
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6918
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1 in
Bolt Length no data in
Measurement Average 3.02 mils

Test Results

Test 16 of 20

DIME Test ID: 2020-06-09-13-17
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6918
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1 in
Bolt Length no data in
Measurement Average 3.04 mils

Test Results

Test 17 of 20

DIME Test ID: 2020-06-09-13-18
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0196
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size 1 in
Bolt Length 2.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 25.05
Spacing Ok

Test Results

Test 18 of 20

DIME Test ID: 2020-06-09-13-19
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0196
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 SL USA
Size 1 in
Bolt Length 2.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 26.8
Spacing Ok

Test Results

Test 19 of 20

DIME Test ID: 2020-06-09-13-20
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6918
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 41.15
Spacing Ok

Test Results

Test 20 of 20

DIME Test ID: 2020-06-09-13-21
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/17/2020
Date Tested: 06/17/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D6918
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 41.7
Spacing Ok