Print Report | Back to Sample Detail

Sample Record for 2020-04-20-17

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214589 DEA: 020J1604 QA Service Level: 1
DIST-CO-RTE-PM: 02-PLU-284-0.0/8.3
Work Description: PLACE HMA (TYPE A), PRECOATED AGGREGATE (SEAL COAT), HMA (LEVELING).
Location Description: PLUMAS COUNTY NEAR CHILCOOT FROM ROUTE 70 TO 1 MILE NORTH OF LITTLE LAST CHANCE CREEK BRIDGE NUMBER 09-0072
Contractor Name: HAT CREEK CONSTRUCTION & MATERIALS, INC.
Contractor Address: 24339 STATE HIGHWAY 89 N.;, BURNEY CA 96013
Resident Engineer: Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-04-20-17
TL Number from the TL Form: 733180
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 04/20/2020
Date that the sample was received by the laboratory/organization performing the testing: 04/21/2020
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/4-inch Untreated Sized Virgin Aggregate
From where was the sample collected: Source
Laboratory sample identification: D78409A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Ward Lake Pit

Material Information

Source Identification (SMARA or name of Pit): 91-18-0008::WARD LAKE PIT
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Sized Untreated Aggregate Stockpile
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 20-03-S1a
Lot number: Unknown
Sublot number: Unknown

Test Results

Test 1 of 1

DIME Test ID: 2020-04-20-17-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 06/09/2020
Date Tested: 04/22/2020
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Total mass of material in the sample 7305.6 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 803 grams
Cumulative mass retained on the 1/2 in. sieve 5156 grams
Cumulative mass retained on the 3/8 in. sieve 6701 grams
Mass retained on the 1/4 in. sieve 7138 grams
Cumulative mass retained on the #4 sieve 7161 grams
Total sample mass passing the #4 sieve 144.6 grams
Total mass of fine material in the sample 144.6 grams
Cumulative mass retained on the #8 sieve 13.5 grams
Cumulative mass retained on the #16 sieve 19.1 grams
Cumulative mass retained on the #30 sieve 23.2 grams
Cumulative mass retained on the #50 sieve 29 grams
Cumulative mass retained on the #100 sieve 40.8 grams
Cumulative mass retained on the #200 sieve 60.3 grams
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 89 %
Cumulative percent passing the 1/2 in. sieve 29.4 %
Cumulative percent passing the 3/8 in. sieve 8.3 %
Cumulative percent passing the 1/4 in. sieve 2.3 %
Cumulative percent passing the #4 sieve 2 %
Cumulative percent passing the #8 sieve 1.8 %
Cumulative percent passing the #16 sieve 1.7 %
Cumulative percent passing the #30 sieve 1.7 %
Cumulative percent passing the #50 sieve 1.6 %
Cumulative percent passing the #100 sieve 1.4 %
Cumulative percent passing the #200 sieve 1.17 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.