*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2020-06-03-4


Project Information

Project ID: 214701 DEA: 030F2844 EFIS: 0319000204 QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC-99-7.1/9.4
Work Description: Construct new PCC precast girder bridge over UPRR at McConnell OH between existing SB and NB alignments
Location Description:
Contractor Name: Contractor Address:
Resident Engineer: Mrudang Shah Structure Rep.: Ha, Chau

Sample Information

DIME Sample ID: 2020-06-03-4
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 06/03/2020
Date that the sample was received by the laboratory/organization performing the testing: 06/05/2020
The quantity of what the sample constitutes: 1
A brief description of the sample: bearing pad
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:

Material Information

Mfg. Lot Number(s): 18890-1
Material/Compound/Elastomer ID: na
Samples Representing: 47
Description (size): 2"x21"x25"
Comments: Unknown
Description (Number of Shims): 4
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): Scougal Rubber
Batch Number: na

Test Results

Test 1 of 4

DIME Test ID: 2020-06-03-4-1
Test Method: SMTL -06: (Neoprene Verification) Bilstein Test
Verified Date: 06/09/2020
Date Tested: 06/09/2020
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Result Pass

Test Results

Test 2 of 4

DIME Test ID: 2020-06-03-4-2
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 06/11/2020
Date Tested: 06/09/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 50
Reading #2 50
Reading #3 50
Reading #4 50
Reading #5 50
Mean 50

Test Results

Test 3 of 4

DIME Test ID: 2020-06-03-4-3
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
Verified Date: 06/11/2020
Date Tested: 06/10/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Number of specimens tested 3
Unit of the Ultimate Tensile Values lbf per sqr in
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.06
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 2558.75 lbf/in^2
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.061
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2827.96 lbf/in^2
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.059
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 2916.06 lbf/in^2
Sample 3 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 2828 lbf/in^2

Test Results

Test 4 of 4

DIME Test ID: 2020-06-03-4-4
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 06/11/2020
Date Tested: 06/10/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Number of specimens tested 3
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.062
Sample 1 Tear Strength 261.2
Sample 2 Median Thickness 0.065
Sample 2 Tear Strength 273.2
Sample 3 Median Thickness 0.06
Sample 3 Tear Strength 241.2
Median of the Tear Strength Values 261.2 lb/in