Print Report | Back to Sample Detail

Sample Record for 2020-04-15-20

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213469 DEA: 024C40V4 EFIS: 0218000125 QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-5-R3.8/R11.7
Work Description: WIDEN TO 6 LANES, BRIDGE REPLACEMENT AND WIDENING AND ROADWAY REHAB
Location Description: SHASTA COUNTY IN AND NEAR ANDERSON FROM ROUTE 5/273 SEPARATION TO 0.4 MILE SOUTH OF CHURN CREEK ROAD OVERCROSSING
Contractor Name: J.F. SHEA CONSTRUCTION
Contractor Address: P.O. BOX 494519, REDDING, CA 96049-4519
Resident Engineer: Henry Benner Structure Rep.: Chaffee, Eric

Sample Information

DIME Sample ID: 2020-04-15-20
TL Number from the TL Form: 897574
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 04/15/2020
Date that the sample was received by the laboratory/organization performing the testing: 04/15/2020
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: 3/4-inch Type G Treated Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D78388
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Fawndale Rock and Asphalt - Redding, CA

Material Information

Source Identification (SMARA or name of Pit): 91-45-0017::FAWNDALE ROCK QUARRY
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 19-30-P2
Lot number: Unknown
Sublot number: Unknown

Test Results

Test 1 of 1

DIME Test ID: 2020-04-15-20-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 06/05/2020
Date Tested: 04/17/2020
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Total mass of material in the sample 7632.7 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 0 grams
Cumulative mass retained on the 1/2 in. sieve 1223 grams
Cumulative mass retained on the 3/8 in. sieve 2215 grams
Mass retained on the 1/4 in. sieve 3722 grams
Cumulative mass retained on the #4 sieve 4667 grams
Total sample mass passing the #4 sieve 2965.7 grams
Total mass of fine material in the sample 521 grams
Cumulative mass retained on the #8 sieve 260.1 grams
Cumulative mass retained on the #16 sieve 353.5 grams
Cumulative mass retained on the #30 sieve 398 grams
Cumulative mass retained on the #50 sieve 424.7 grams
Cumulative mass retained on the #100 sieve 444.6 grams
Cumulative mass retained on the #200 sieve 458.2 grams
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 84 %
Cumulative percent passing the 3/8 in. sieve 71 %
Cumulative percent passing the 1/4 in. sieve 51.2 %
Cumulative percent passing the #4 sieve 38.9 %
Cumulative percent passing the #8 sieve 19.5 %
Cumulative percent passing the #16 sieve 12.5 %
Cumulative percent passing the #30 sieve 9.2 %
Cumulative percent passing the #50 sieve 7.2 %
Cumulative percent passing the #100 sieve 5.7 %
Cumulative percent passing the #200 sieve 4.69 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.