Print Report | Back to Sample Detail

Sample Record for 2020-04-15-17

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214322 DEA: 021H74U4 EFIS: 0218000043 QA Service Level: 1
DIST-CO-RTE-PM: 02-TEH-36-87.8/89.1
Work Description: CURVE REALIGNMENT AND EXTENDING THE TRUCK CLIMBING LANE.
Location Description: TEHAMA COUNTY NEAR MINERAL FROM 0.1 MILE TO 1.5 MILES EAST OF ROUTE 89
Contractor Name: STEVE MANNING CONSTRUCTION, INC
Contractor Address: 5211 Churn Creek Road, Redding, CA 96002
Resident Engineer: Tofael Anwar Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-04-15-17
TL Number from the TL Form: 853430
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 04/15/2020
Date that the sample was received by the laboratory/organization performing the testing: 04/15/2020
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/4-inch Type A Treated Virgin Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D78385A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Orland Plant

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-11-0007::ORLAND PLANT
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 20-02-S1
Lot number: Unknown
Sublot number: Unknown
Aggregate Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2020-04-15-17-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 06/04/2020
Date Tested: 04/16/2020
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 98.5 %
Cumulative percent passing the 1/2 in. sieve 78.5 %
Cumulative percent passing the 3/8 in. sieve 71 %
Cumulative percent passing the 1/4 in. sieve 55 %
Cumulative percent passing the #4 sieve 46.1 %
Cumulative percent passing the #8 sieve 29.1 %
Cumulative percent passing the #16 sieve 19 %
Cumulative percent passing the #30 sieve 12.7 %
Cumulative percent passing the #50 sieve 8.2 %
Cumulative percent passing the #100 sieve 4.9 %
Cumulative percent passing the #200 sieve 3.35 %