*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2020-05-27-9


Project Information

Project ID: 213598 DEA: 051F75U4 EFIS: 0518000092 QA Service Level: 1
DIST-CO-RTE-PM: 05-MON-101-R36.9/47.7
Work Description: CRCP, SEISMIC RETROFIT, BRIDGE WIDENING AND MEDIAN BARRIER
Location Description: MONTEREY COUNTY IN AND NEAR KING CITY FROM 0.4 MILE SOUTH OF WILD HORSE ROAD OVERCROSSING TO TEAGUE AVENUE
Contractor Name: OHL USA, INC. Contractor Address: 1920 Main St. Suite 310
Resident Engineer: Tim Lang Structure Rep.: Moreno, Juan

Sample Information

DIME Sample ID: 2020-05-27-9
TL Number from the TL Form:
Sample Submitted By Organization: Caltrans Vallejo Field Laboratory
Sample Organization Contact: (510) 774-6009
Type of Sample: Acceptance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 05/27/2020
Date that the sample was received by the laboratory/organization performing the testing: 06/19/2020
The quantity of what the sample constitutes: 64
A brief description of the sample: 7/8" x 2.75" F3125 A325 MG
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:

Material Information

Rocap Number(s): AAAM087275
Heat Number(s): 100797633
Nut Mfg. Lot Number(s): N/A
Washer Mfg. Lot Number(s): N/A
Bolt Specification: F3125 A325
Bolt Length(s): 2.75
Nut Specification: N/A
Washer Specification: N/A
Finish: MG
Diameter/Size: 7/8 x 2.75
Bolt Mfg. Lot Number: BM0765
Rocap Test Requirement(s): Yes
Lubricant Requirements(s): Yes

Test Results

Test 1 of 8

DIME Test ID: 2020-05-27-9-1
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/22/2020
Date Tested: 06/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0765
Finish Coating ASTM B695 - Mech Galv
Product Markings SL A325 USA
Size 8.75 in
Bolt Length 2.75 in
Gage Type Pass

Test Results

Test 2 of 8

DIME Test ID: 2020-05-27-9-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/22/2020
Date Tested: 06/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0765
Finish Coating ASTM B695 - Mech Galv
Product Markings SL A325 USA
Size 8.75 in
Bolt Length 2.75 in
Gage Type Pass

Test Results

Test 3 of 8

DIME Test ID: 2020-05-27-9-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/22/2020
Date Tested: 06/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0765
Finish Coating ASTM B695 - Mech Galv
Product Markings SL A325 USA
Size 8.75 in
Bolt Length 2.75 in
Gage Type Pass

Test Results

Test 4 of 8

DIME Test ID: 2020-05-27-9-4
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/22/2020
Date Tested: 06/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0765
Finish Coating ASTM B695 - Mech Galv
Product Markings SL A325 USA
Size 8.75 in
Bolt Length 2.75 in
Measurement Average 3.98 mils

Test Results

Test 5 of 8

DIME Test ID: 2020-05-27-9-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/22/2020
Date Tested: 06/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0765
Finish Coating ASTM B695 - Mech Galv
Product Markings SL A325 USA
Size 8.75 in
Bolt Length 2.75 in
Measurement Average 4.76 mils

Test Results

Test 6 of 8

DIME Test ID: 2020-05-27-9-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/22/2020
Date Tested: 06/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0765
Finish Coating ASTM B695 - Mech Galv
Product Markings SL A325 USA
Size 8.75 in
Bolt Length 2.75 in
Measurement Average 3.26 mils

Test Results

Test 7 of 8

DIME Test ID: 2020-05-27-9-7
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/22/2020
Date Tested: 06/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0765
Finish Coating ASTM B695 - Mech Galv
Product Markings SL A325 USA
Size 8.75 in
Bolt Length 2.75 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.85
Spacing Ok

Test Results

Test 8 of 8

DIME Test ID: 2020-05-27-9-8
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/22/2020
Date Tested: 06/19/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0765
Finish Coating ASTM B695 - Mech Galv
Product Markings SL A325 USA
Size 8.75 in
Bolt Length 2.75 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.65
Spacing Ok