*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2020-05-20-2


Project Information

Project ID: 214520 DEA: 051H9804 EFIS: 0517000043 QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-101-78.4/79.0
Work Description: ROADWAY EXCAVATION, PLACE AGGREGATE BASE, HMA AND RHMA-G.
Location Description: SANTA BARBARA COUNTY NEAR SANTA MARIA FROM 0.3 MILE SOUTH TO 0.3 MILE NORTH OF SOLOMON SUMMIT UNDERCROSSING
Contractor Name: Calportland Construction Contractor Address: 1625 E DONOVAN RD
Resident Engineer: Lilian (Poh Chu) Bennetzen Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-05-20-2
TL Number from the TL Form:
Sample Submitted By Organization: CT D05 - Field Laboratory
Sample Organization Contact: (559) 230-3109
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/20/2020
Date that the sample was received by the laboratory/organization performing the testing: 05/20/2020
The quantity of what the sample constitutes: 750
A brief description of the sample: One Box HMA
From where was the sample collected: Manufacturer
Laboratory sample identification: D5 20-A-038
Structure unique identifier:
Structure name:

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 6

Test Results

Test 1 of 1

DIME Test ID: 2020-05-20-2-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 05/21/2020
Date Tested: 05/20/2020
Submitted By Organization: CT D05 - Field Laboratory
Organization Address: 50 Higuera St
Test General Comments: 5.20 - 6.00
Additional Comments When Verified:
Test procedure used? Method A
Asphalt Binder Content 5.61 %
Mass of HMA prior to ignition 2160 g
Mass of aggregate remaining after ignition 2016.9 g
Correction Factor (Percent by mass of HMA Specimen) 1.01 %
Moisture Content 0 %
Test Temperature 538 F