*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2020-05-08-1


Project Information

Project ID: 88888 DEA: STOCK EFIS: STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Contractor Address:
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-05-08-1
TL Number from the TL Form:
Sample Submitted By Organization: CT QASI - Los Angeles Field Laboratory
Sample Organization Contact: (858) 285-5797
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 05/08/2020
Date that the sample was received by the laboratory/organization performing the testing: 05/28/2020
The quantity of what the sample constitutes: 1 Lot of 600 washers
A brief description of the sample: ASTM F436 Washer
From where was the sample collected: Other
Laboratory sample identification:
Structure unique identifier:
Structure name:

Material Information

Rocap Number(s): NA
Heat Number(s): X1450
Nut Mfg. Lot Number(s): NA
Washer Mfg. Lot Number(s): D7721
Bolt Specification: NA
Bolt Length(s): NA
Nut Specification: NA
Washer Specification: F436
Finish: B695 Class 55
Diameter/Size: 1 1/8"
Bolt Mfg. Lot Number: NA
Rocap Test Requirement(s): NA
Lubricant Requirements(s): NA

Test Results

Test 1 of 8

DIME Test ID: 2020-05-08-1-1
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/04/2020
Date Tested: 06/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7721
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.125 in
Bolt Length no data in
Measurement Average 3.41 mils

Test Results

Test 2 of 8

DIME Test ID: 2020-05-08-1-2
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/04/2020
Date Tested: 06/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7721
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.125 in
Bolt Length no data in
Measurement Average 3.32 mils

Test Results

Test 3 of 8

DIME Test ID: 2020-05-08-1-3
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/04/2020
Date Tested: 06/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7721
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.125 in
Bolt Length no data in
Measurement Average 3.35 mils

Test Results

Test 4 of 8

DIME Test ID: 2020-05-08-1-4
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/04/2020
Date Tested: 06/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7721
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.125 in
Bolt Length no data in
Measurement Average 3.31 mils

Test Results

Test 5 of 8

DIME Test ID: 2020-05-08-1-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/04/2020
Date Tested: 06/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7721
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.125 in
Bolt Length no data in
Measurement Average 3.12 mils

Test Results

Test 6 of 8

DIME Test ID: 2020-05-08-1-6
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/04/2020
Date Tested: 06/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7721
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.125 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 38.05
Spacing Ok

Test Results

Test 7 of 8

DIME Test ID: 2020-05-08-1-7
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/04/2020
Date Tested: 06/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7721
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.125 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 38.1
Spacing Ok

Test Results

Test 8 of 8

DIME Test ID: 2020-05-08-1-8
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/04/2020
Date Tested: 06/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D7721
Finish Coating ASTM B695 - Mech Galv
Product Markings P F436
Size 1.125 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 39.4
Spacing Ok