*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2020-05-06-2


Project Information

Project ID: 88888 DEA: STOCK EFIS: STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Contractor Address:
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-05-06-2
TL Number from the TL Form:
Sample Submitted By Organization: Caltrans Vallejo Field Laboratory
Sample Organization Contact: (510) 774-6009
Type of Sample: Acceptance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 05/06/2020
Date that the sample was received by the laboratory/organization performing the testing: 05/06/2020
The quantity of what the sample constitutes: 24 pieces
A brief description of the sample: 1-1/2" X 36" Anchor bolt
From where was the sample collected: Fabricator
Laboratory sample identification: B24-021-20
Structure unique identifier:
Structure name: STOCK

Material Information

Rocap Number(s): N/A
Heat Number(s): 3090238
Nut Mfg. Lot Number(s): 32526-201116
Washer Mfg. Lot Number(s): 188267
Bolt Specification: 1554
Bolt Length(s): 36"
Nut Specification: 194
Washer Specification: 436
Finish: Galvanize-Blue Dye
Diameter/Size: 1-1/2" x 36"
Bolt Mfg. Lot Number: 49589
Rocap Test Requirement(s): none
Lubricant Requirements(s):

Test Results

Test 1 of 14

DIME Test ID: 2020-05-06-2-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: Nut Proof
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
132526-201116246900Nut Proofbewing
UTM 400kip
Temperature 72 f

Test Results

Test 2 of 14

DIME Test ID: 2020-05-06-2-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: Nut Proof
Additional Comments When Verified:
Number of Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)CommentsTested By
232526-201116247494Nut Proof
UTM 400kip
Temperature 72 f

Test Results

Test 3 of 14

DIME Test ID: 2020-05-06-2-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 3090238
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings YELOW PAINT
Size 1.5 in
Bolt Length 36 in
Gage Type Pass

Test Results

Test 4 of 14

DIME Test ID: 2020-05-06-2-4
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 32526-201116
Finish Coating ASTM F2329 - Hot Dip
Product Markings U 2HZN
Size 1.5 in
Gage Type Pass

Test Results

Test 5 of 14

DIME Test ID: 2020-05-06-2-5
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 32526-201116
Finish Coating ASTM F2329 - Hot Dip
Product Markings U 2HZN
Size 1.5 in
Gage Type Pass

Test Results

Test 6 of 14

DIME Test ID: 2020-05-06-2-6
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 32526-201116
Finish Coating ASTM F2329 - Hot Dip
Product Markings U 2HZN
Size 1.5 in
Gage Type Pass

Test Results

Test 7 of 14

DIME Test ID: 2020-05-06-2-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 3090238
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings YELOW PAINT
Size 1.5 in
Bolt Length 36 in
Measurement Average 5.76 mils

Test Results

Test 8 of 14

DIME Test ID: 2020-05-06-2-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 32526-201116
Finish Coating ASTM F2329 - Hot Dip
Product Markings U 2HZN
Size 1.5 in
Bolt Length no data in
Measurement Average 2.6 mils

Test Results

Test 9 of 14

DIME Test ID: 2020-05-06-2-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 32526-201116
Finish Coating ASTM F2329 - Hot Dip
Product Markings U 2HZN
Size 1.5 in
Bolt Length no data in
Measurement Average 3.93 mils

Test Results

Test 10 of 14

DIME Test ID: 2020-05-06-2-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 32526-201116
Finish Coating ASTM F2329 - Hot Dip
Product Markings U 2HZN
Size 1.5 in
Bolt Length no data in
Measurement Average 4.2 mils

Test Results

Test 11 of 14

DIME Test ID: 2020-05-06-2-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 188267
Mfg. Lot Number no data
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size 1.5 in
Bolt Length no data in
Measurement Average 2.8 mils

Test Results

Test 12 of 14

DIME Test ID: 2020-05-06-2-12
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 188267
Mfg. Lot Number no data
Finish Coating ASTM B695 - Mech Galv
Product Markings WS
Size 1.5 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 39.95
Spacing Ok

Test Results

Test 13 of 14

DIME Test ID: 2020-05-06-2-13
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Number of Samples 1
SampleHeat NumberDiameter (in)Area (sqin)Stress at Offset (psi)Tensile Strength (psi)Elongation in 4 x d (%)Tested By
130902380.5040.2605068971028.1bewing
UTM 67kip
Temperature 72 f

Test Results

Test 14 of 14

DIME Test ID: 2020-05-06-2-14
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 05/15/2020
Date Tested: 05/14/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments:
Additional Comments When Verified:
Number of Samples 1
SampleHeat NumberDiameter (in)Area (sqin)Stress at Offset (psi)Tensile Strength (psi)Elongation in 4 x d (%)Tested By
230902380.5040.2614829020227.6bewing
UTM 67kip
Temperature 72 f