Print Report | Back to Sample Detail

Sample Record for 2019-07-01-16

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213826 DEA: 023H1704 EFIS: 0217000066 QA Service Level: 1
DIST-CO-RTE-PM: 02-MOD-299-Var
Work Description: COLD IN-PLACE RECYCLING COVERED WITH HMA, GUARDRAIL, STRIPING.
Location Description: MODOC COUNTY IN AND NEAR ALTURAS AT VARIOUS LOCATIONS FROM 0.3 MILE EAST OF ROCK CREEK BRIDGE TO PATTERSON STREET
Contractor Name: EAGLE PEAK ROCK & PAVING INC
Contractor Address: P.O. BOX 879, ALTURAS, CA 96101
Resident Engineer: Mike Zdenek Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-07-01-16
TL Number from the TL Form:
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 07/01/2019
Date that the sample was received by the laboratory/organization performing the testing: 07/02/2019
The quantity of what the sample constitutes: JMF
A brief description of the sample: 3/8" Hot Bin (Treated)
From where was the sample collected: Manufacturer
Laboratory sample identification: D77970B
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Eagle Peak Rock and Paving, Alturas, CA

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-25-0029::HOGSBACK
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Batch Plant Hot Bins
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number: Unknown
Lot number: Unknown
Sublot number: Unknown
Aggregate Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2019-07-01-16-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 04/24/2020
Date Tested: 07/02/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 98.2 %
Cumulative percent passing the 1/4 in. sieve 62.6 %
Cumulative percent passing the #4 sieve 26 %
Cumulative percent passing the #8 sieve 1.3 %
Cumulative percent passing the #16 sieve 1 %
Cumulative percent passing the #30 sieve 1 %
Cumulative percent passing the #50 sieve 1 %
Cumulative percent passing the #100 sieve 0.9 %
Cumulative percent passing the #200 sieve 0.77 %