Sample Record for 2020-02-14-28
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 214520 DEA: 051H9804 EFIS: 0517000043
QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-101-78.4/79.0
Work Description: ROADWAY EXCAVATION, PLACE AGGREGATE BASE, HMA AND RHMA-G.
Location Description: SANTA BARBARA COUNTY NEAR SANTA MARIA FROM 0.3 MILE SOUTH TO 0.3 MILE NORTH OF SOLOMON SUMMIT UNDERCROSSING
Contractor Name: Calportland Construction
Contractor Address: 1625 E DONOVAN RD, SANTA MARIA
Resident Engineer: Lilian (Poh Chu) Bennetzen Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2020-02-14-28
TL Number from the TL Form:
Sample Submitted By Organization: CalPortland
Sample Organization Contact: (805) 345-3472
Type of Sample: Quality Control
Type of Material: Hot Mix Asphalt
Sample Taken Date: 02/14/2020
Date that the sample was received by the laboratory/organization performing the testing: 02/14/2020
The quantity of what the sample constitutes: 15 kg
A brief description of the sample: Lab Mixed HMA
From where was the sample collected: Other
Laboratory sample identification: 755727228
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CalPortland Santa Maria
Material Information
HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number: Unknown
Sublot number: Unknown
HMA Mix Number:
Test Results
Test 1 of 5
DIME Test ID: 2020-02-14-28-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/03/2020
Date Tested: 02/14/2020
Submitted By Organization: CalPortland
Organization Address: 1625 East Donovan Road,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93454
Organization Email: pimhoff@calportland.com
Organization Phone: (805) 345-3472
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests
|
1
|
What is the unit of measurement for theoretical density?
|
US Units
|
Mass Determination
|
Air
|
Specific Gravity for Sample 1
|
2.369
|
Theoretical maximum density at 25°C (77°F)
|
no data
|
Test 2 of 5
DIME Test ID: 2020-02-14-28-2
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 04/03/2020
Date Tested: 02/14/2020
Submitted By Organization: CalPortland
Organization Address: 1625 East Donovan Road,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93454
Organization Email: pimhoff@calportland.com
Organization Phone: (805) 345-3472
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Percent Air Voids
|
4.0 %
|
Percent Air Voids 2
|
4.0 %
|
Percent Air Voids 3
|
3.8 %
|
Percent Air Voids Average
|
3.9 %
|
Test 3 of 5
DIME Test ID: 2020-02-14-28-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/03/2020
Date Tested: 02/14/2020
Submitted By Organization: CalPortland
Organization Address: 1625 East Donovan Road,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93454
Organization Email: pimhoff@calportland.com
Organization Phone: (805) 345-3472
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity
|
2.274
|
Bulk Specific Gravity 2
|
2.274
|
Bulk Specific Gravity 3
|
2.278
|
Average Bulk Specific Gravity
|
2.275
|
Test 4 of 5
DIME Test ID: 2020-02-14-28-4
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Submitted By Organization: CalPortland
Organization Address: 1625 East Donovan Road,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93454
Organization Email: pimhoff@calportland.com
Organization Phone: (805) 345-3472
This test has been superseded on 04/03/2020.
Reason: retested
Test 5 of 5
DIME Test ID: 2020-02-14-28-5
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/03/2020
Date Tested: 02/14/2020
Submitted By Organization: CalPortland
Organization Address: 1625 East Donovan Road,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93454
Organization Email: pimhoff@calportland.com
Organization Phone: (805) 345-3472
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used?
|
Fahrenheit
|
Test procedure used?
|
Method A
|
Mass of HMA Sample prior to ignition
|
1500.0 g
|
Corrected Asphalt Binder Content
|
5.90 %
|
Mass Loss
|
no data
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.00 %
|
Moisture Content
|
0.00 %
|
Temperature Compensation Factor
|
no data
|
Test Temperature
|
1000 F
|