Print Report | Back to Sample Detail

Sample Record for 2020-01-07-9

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214666 DEA: 022H8104 EFIS: 0217000012 QA Service Level: 1
DIST-CO-RTE-PM: 02-TRI-299-1.67/45.12
Work Description: Trinity Culverts
Location Description: Culvert rehabilitation in Trinity County near Salyer at various locations from 0.1 mile West of White House Gulch Road to 0.4 mile West of Slattery Pond Road.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2020-01-07-9
TL Number from the TL Form: 678221
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Preliminary
Type of Material: Soil
Sample Taken Date: 01/07/2020
Date that the sample was received by the laboratory/organization performing the testing: 01/09/2020
The quantity of what the sample constitutes: Preliminary Design
A brief description of the sample: Soil for Use in Fill
From where was the sample collected: Job Site
Laboratory sample identification: D78322
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: In Situ

Material Information

The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Field No. TC-1
A detailed description of where the material sample was collected: 02-TRI-299-8.19, Embankment on South Side, 6 - 12 inch Depth
Where the material sample would have been placed if not sampled: Unknown

Test Results

Test 1 of 3

DIME Test ID: 2020-01-07-9-2
Test Method: CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)
Verified Date: 02/19/2020
Date Tested: 02/07/2020
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Plastic Index(PI) 20
Liquid Limit (LL) 43.1 %
Plastic Limit (PL) 23.6 %

Test 2 of 3

DIME Test ID: 2020-01-07-9-3
Test Method: CTM 643-June 2007: Method for Determining Field and Laboratory Resistivity and pH Measurements for Soil and Water
Verified Date: 02/19/2020
Date Tested: 01/21/2020
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Minimum soil resistance corrected to 15.5 4088.44 Ohm-cm
Minimum soil resistivity at 15.5 4088 Ohm-cm
Minimum soil resistance of the lab measurement 3675 Ohms
Soil sample temperature 20 C
pH of soil 7.1

Test 3 of 3

DIME Test ID: 2020-01-07-9-4
Test Method: CTM 203-February 2008: Mechanical Analysis of Soils
Verified Date: 02/19/2020
Date Tested: 02/07/2020
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test: Could not get raw data input to produce correct results. Calculated values were input directly.
Test Result Compliance:
Additional Comments When Verified:
Cumulative percent passing the 3 in. sieve 100 %
Cumulative percent passing the 2 1/2 in. sieve 100 %
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 95 %
Cumulative percent passing the 1 in. sieve 85 %
Cumulative percent passing the 3/4 in. sieve 77 %
Cumulative percent passing the 1/2 in. sieve 63 %
Cumulative percent passing the 3/8 in. sieve 54 %
Cumulative percent passing the #4 sieve 37 %
Cumulative percent passing the #8 sieve 30 %
Cumulative percent passing the #16 sieve 24 %
Cumulative percent passing the #30 sieve 20 %
Cumulative percent passing the #50 sieve 16 %
Cumulative percent passing the #100 sieve 13 %
Cumulative percent passing the #200 sieve 11 %
Cumulative Percent Passing on 1 Micron 4 %
Cumulative Percent Passing on 5 Microns 6 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.