Print Report | Back to Sample Detail

Sample Record for 2017-12-22-21

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 99999 DEA: 0322222 QA Service Level:
DIST-CO-RTE-PM: 03-SAC,OMG-888,99,80-0.6-0.6
Work Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2017-12-22-21
TL Number from the TL Form: Aggregate TL Number
Sample Submitted By Organization: CT HQ - Sacramento Office of Structural Materials Field Laboratory
Sample Organization Contact: 7146885366
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 12/22/2017
Date that the sample was received by the laboratory/organization performing the testing: 12/22/2017
The quantity of what the sample constitutes: Unknown Quantity
A brief description of the sample: 3 4 in Aggregate Sample
From where was the sample collected: Source
Laboratory sample identification: Aggregate Sample ID
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SNC Mustang Pit Sparks NV

Material Information

Source Identification (SMARA or name of Pit): Aggregate Source ID
The fabricator's/manufacturer's product name for the sample: SNC Mustang Pit Sparks NV
The fabricator/manufacturer designation for the sample: SNC Mustang Pit Sparks NV
The plant number: 99999
A detailed description of where the material sample was collected: Coarse aggregate pile at source
Where the material sample would have been placed if not sampled: 7753550420
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: Unknown
Lot number: Unknown
Sublot number: Unknown

Test Results

Test 1 of 1

DIME Test ID: 2017-12-22-21-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 01/10/2020
Date Tested: 01/02/2020
Submitted By Organization: CT HQ - Sacramento Office of Structural Materials Field Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bscott@altavistasolutions.com
Organization Phone: 7146885366
General Comments for this Test:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Cumulative percent passing the 1 1/2 in. sieve 0 %
Cumulative percent passing the 1 in. sieve 0 %
Cumulative percent passing the 3/4 in. sieve 0 %
Cumulative percent passing the 1/2 in. sieve 0 %
Cumulative percent passing the 3/8 in. sieve 0 %
Cumulative percent passing the 1/4 in. sieve 0 %
Cumulative percent passing the #4 sieve 0 %
Cumulative percent passing the #8 sieve 0 %
Cumulative percent passing the #16 sieve 0 %
Cumulative percent passing the #30 sieve 0 %
Cumulative percent passing the #50 sieve 0 %
Cumulative percent passing the #100 sieve 0 %
Cumulative percent passing the #200 sieve 0 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.