Print Report | Back to Sample Detail

Sample Record for 2019-12-20-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213994 DEA: 040P7504 EFIS: 0417000517 QA Service Level: 1
DIST-CO-RTE-PM: 04-SOL-12-7.5/13.6,20.5/25.0
Work Description: COLD PLANE ASPHALT CONCRETE PAVEMENT AND PLACE HMA (A).
Location Description: SOLANO COUNTY NEAR SUISUN CITY FROM WALTERS ROAD TO SHILOH ROAD AND IN AND NEAR RIO VISTA FROM 0.2 MILE WEST OF CURRIE ROAD TO 0.2 MILE EAST OF CHURCH ROAD
Contractor Name: OC Jones & Sons Inc
Contractor Address: 1520 4th Street, Berkeley, CA 94710
Resident Engineer: Hamed Rastegarpour Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-12-20-2
TL Number from the TL Form: NA
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 12/20/2019
Date that the sample was received by the laboratory/organization performing the testing: 12/21/2019
The quantity of what the sample constitutes: 200 tons
A brief description of the sample: 3/4"HMA+RAP SP-WMA
From where was the sample collected: Fabricator
Laboratory sample identification: Con_19_816
Structure unique identifier: 48-Solano
Structure name: NA
The fabricator/manufacturer/facility name: Clements Hot Plant

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 2
Sublot number: 4
HMA Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2019-12-20-2-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 12/23/2019
Date Tested: 12/21/2019
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Method Performed no data
Mass of container filled with water 7373.0 grams
Mass of oven-dry sample in air for Sample 1 2555.0 grams
Mass of container filled with the sample and water for Sample 1 8940.0 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.586
Theoretical maximum density at 25°C (77°F) no data