Print Report | Back to Sample Detail

Sample Record for 2019-03-29-20

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-03-29-20
TL Number from the TL Form: C816003
Sample Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Quality Control
Type of Material: Hot Mix Asphalt
Sample Taken Date: 03/29/2019
Date that the sample was received by the laboratory/organization performing the testing: 08/23/2019
The quantity of what the sample constitutes: 8
A brief description of the sample: 3/4 inch HMA-A w/Lime w/RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Syar Lake Herman

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: Unknown
Sublot number: Unknown

Test Results

Test 1 of 3

DIME Test ID: 2019-03-29-20-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 12/20/2019
Date Tested: 09/04/2019
Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Ignition oven T-308
Test Result Compliance:
Additional Comments When Verified:
Test procedure used? Method B
Asphalt Binder Content 4.12 %
Mass of HMA prior to ignition 2062.9 g
Mass of aggregate remaining after ignition 1947.9 g
Correction Factor (Percent by mass of HMA Specimen) 1.28 %
Moisture Content 0.17 %
Test Temperature 538 F

Test 2 of 3

DIME Test ID: 2019-03-29-20-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 12/20/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: GMM T-209 for 019-027
Test Result Compliance:
Additional Comments When Verified:
Number of tests 2
Mass Determination Water
Method Performed no data
Mass of oven-dry sample in air for Sample 1 2522.0 grams
Mass of sample in water for Sample 1 1497.0 grams
Mass of oven-dry sample in air for Sample 2 2728.0 grams
Mass of sample in water for Sample 2 1618.0 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.460
Specific Gravity for Sample 2 2.459
Average Specific Gravity 2.460
Theoretical maximum density at 25°C (77°F) no data

Test 3 of 3

DIME Test ID: 2019-03-29-20-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 12/20/2019
Date Tested: 12/19/2019
Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Gmb Wax T-275 for 019-027
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity 2.347
Bulk Specific Gravity 2 2.354
Bulk Specific Gravity 3 2.353
Average Bulk Specific Gravity 2.351

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.