Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 214236 DEA: 024H3804 EFIS: 0218000112 MINOR: 02A1831
QA Service Level: 1
DIST-CO-RTE-PM: 02-PLU-36-6.6/6.6001
Work Description: Chester MS Infiltration Trench Project
Location Description: Storm Water Improvements in Plumas County about 1.9 miles West of Chester at the Chester Maintenance Station.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2019-09-09-18
TL Number from the TL Form: 847546
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 09/09/2019
Date that the sample was received by the laboratory/organization performing the testing: 09/10/2019
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: Combined 1/2-inch RAP
From where was the sample collected: Manufacturer
Laboratory sample identification: D78165B
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sierra Cascade Aggregate and Asphalt Products
RAP Source: Sierra Cascade
Aggregate Size: Combined
Aggregate Source: Unknown
RAP Stockpile: Static
Stockpile Size (tons): Unknown
Reclaimed Asphalt Pavement Mix Number:
DIME Test ID: 2019-09-09-18-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 12/18/2019
Date Tested: 09/11/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used?
|
Fahrenheit
|
Test procedure used?
|
Method A
|
Mass of HMA Sample prior to ignition
|
no data
|
Corrected Asphalt Binder Content
|
6.73 %
|
Mass Loss
|
no data
|
Correction Factor (Percent by mass of HMA Specimen)
|
no data
|
Moisture Content
|
no data
|
Temperature Compensation Factor
|
no data
|
Test Temperature
|
no data
|
DIME Test ID: 2019-09-09-18-2
Test Method: AASHTO T30-15: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 12/18/2019
Date Tested: 09/11/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Cumulative percent passing the 2 in. sieve
|
100 %
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
Cumulative percent passing the 1/2 in. sieve
|
98.8 %
|
Cumulative percent passing the 3/8 in. sieve
|
93.8 %
|
Cumulative percent passing the 1/4 in. sieve
|
82.3 %
|
Cumulative percent passing the #4 sieve
|
73.4 %
|
Cumulative percent passing the #8 sieve
|
54.1 %
|
Cumulative percent passing the #16 sieve
|
40 %
|
Cumulative percent passing the #30 sieve
|
29.9 %
|
Cumulative percent passing the #50 sieve
|
21.6 %
|
Cumulative percent passing the #100 sieve
|
15.2 %
|
Cumulative percent passing the #200 sieve
|
11.07 %
|
DIME Test ID: 2019-09-09-18-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 12/18/2019
Date Tested: 09/11/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of tests
|
1
|
What is the unit of measurement for theoretical density?
|
US Units
|
Mass Determination
|
Air
|
Specific Gravity for Sample 1
|
2.487
|
Theoretical maximum density at 25°C (77°F)
|
no data
|