Print Report | Back to Sample Detail

Sample Record for 2019-12-10-18

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 208973 DEA: 120H1004 EFIS: 1200000180 COOP: 120670 QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-405,73,405,605-9.3/24.3
Work Description: (Alternative Delivery) San Diego Freeway (I-405) Improvement Project SR-73 to I-605, Design Build Project, Administered by Orange County Transportation Authority, Caltrans METS to perform Source Inspection per RFP.
Location Description: Orange and Los Angeles Counties: 12-ORA-405 PM 9.3/24.2 / 07-LA-405 PM 0.0/1.2 12-ORA-22 PM R0.7/R3.8 / 12-ORA-22 PM R0.5/R0.7 12-ORA-73 PM R27.2/R27.8 / 12-ORA-605 PM 3.5/R1.6 07-LA-605 PM R0.0/R1.2
Contractor Name: OC 405 Partners
Contractor Address: 3100 W Lake Center Dr, Santa Ana, CA 92704
Resident Engineer: Hank Alonso (reports) Structure Rep.: Cal Zachman (reports)

Sample Information

DIME Sample ID: 2019-12-10-18
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 12/10/2019
Date that the sample was received by the laboratory/organization performing the testing: 12/18/2019
The quantity of what the sample constitutes: 4
A brief description of the sample: elastomeric bearing pad
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Scougal Rubber

Material Information

Mfg. Lot Number(s): 17783
Material/Compound/Elastomer ID: na
Samples Representing: 150
Description (size): 2.87x14x144.02x14x145.17x14x146.9x24x24
Comments: Unknown
Description (Number of Shims): 5 7 9 12
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): Scougal Rubber
Batch Number: na

Test Results

Test 1 of 4

DIME Test ID: 2019-12-10-18-1
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 12/19/2019
Date Tested: 12/19/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 52
Reading #2 51
Reading #3 50
Reading #4 50
Reading #5 51
Mean 50.8

Test 2 of 4

DIME Test ID: 2019-12-10-18-2
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
Verified Date: 12/19/2019
Date Tested: 12/19/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.084
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 2464.33 lbf/in^2
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.079
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2147.44 lbf/in^2
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.08
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 2363.7 lbf/in^2
Sample 3 Elongation (350% Min) Pass
Sample 4 Median Thickness 0.085
Sample 4 Thickness all Within 0.003 inch? Yes
Sample 4 Ultimate Tensile 2313.32 lbf/in^2
Sample 4 Elongation (350% Min) Pass
Sample 5 Median Thickness 0.082
Sample 5 Thickness all Within 0.003 inch? Yes
Sample 5 Ultimate Tensile 2523.08 lbf/in^2
Sample 5 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 2363.7 lbf/in^2

Test 3 of 4

DIME Test ID: 2019-12-10-18-3
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 12/19/2019
Date Tested: 12/19/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.087
Sample 1 Tear Strength 218.1
Sample 2 Median Thickness 0.08
Sample 2 Tear Strength 205.7
Sample 3 Median Thickness 0.076
Sample 3 Tear Strength 235.9
Median of the Tear Strength Values 218.1 lb/in

Test 4 of 4

DIME Test ID: 2019-12-10-18-4
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 12/19/2019
Date Tested: 12/19/2019
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: lisa.dobeck@dot.ca.gov
Organization Phone: (916) 227-7919
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Result Pass

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.