Print Report | Back to Sample Detail

Sample Record for 2019-12-11-10

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212794 DEA: 024F7804 EFIS: 0213000032 QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA,LAS,PLU,SHA,SIS,TRI-5-22087-25.7
Work Description: CMS SIGNS IN SHASTA COUNTY
Location Description: IN BUTTE, LASSEN, PLUMAS, SHASTA, SISKIYOU AND TRINITY COUNTIES IN VARIOUS LOCATIONS.
Contractor Name: Tullis Inc
Contractor Address: 16951 Clear Creek Road, Redding, CA 96001
Resident Engineer: Joel Gasik Structure Rep.: Nicholas McLean

Sample Information

DIME Sample ID: 2019-12-11-10
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 12/11/2019
Date that the sample was received by the laboratory/organization performing the testing: 12/18/2019
The quantity of what the sample constitutes: 139
A brief description of the sample: 3/4-10 x 2 A325 HVY HX MG BOLT
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Structural and Steel Products

Material Information

Rocap Number(s):
Heat Number(s): 100894961
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: A325
Bolt Length(s): 2"
Nut Specification: n/a
Washer Specification: n/a
Finish: Mechanically Galvanized to ASTM B695
Diameter/Size: 3/4"
Bolt Mfg. Lot Number: 418262A
Rocap Test Requirement(s):
Lubricant Requirements(s): not required

Test Results

Test 1 of 8

DIME Test ID: 2019-12-11-10-1
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/23/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 418262A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2 in
Gage Type Pass

Test 2 of 8

DIME Test ID: 2019-12-11-10-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/23/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 418262A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2 in
Gage Type Pass

Test 3 of 8

DIME Test ID: 2019-12-11-10-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/23/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 418262A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2 in
Gage Type Pass

Test 4 of 8

DIME Test ID: 2019-12-11-10-4
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/23/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 418262A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2 in
Measurement Average 3.63 mils

Test 5 of 8

DIME Test ID: 2019-12-11-10-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/23/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 418262A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2 in
Measurement Average 2.84 mils

Test 6 of 8

DIME Test ID: 2019-12-11-10-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/23/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 418262A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2 in
Measurement Average 3.84 mils

Test 7 of 8

DIME Test ID: 2019-12-11-10-7
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/23/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 418262A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.12
Spacing Ok

Test 8 of 8

DIME Test ID: 2019-12-11-10-8
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 12/23/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 418262A
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA N
Size .75 in
Bolt Length 2 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.05
Spacing Ok