Sample Record for 2019-12-11-1
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 214077 DEA: 101C5304 EFIS: 1015000002
QA Service Level: 1
DIST-CO-RTE-PM: 10-STA,SJ-5,99-Var
Work Description: OVERHEAD AND ROADSIDE SIGNS, AND MODIFY ELECTRICAL SYSTEMS.
Location Description: SAN JOAQUIN AND STANISLAUS COUNTIES AT VARIOUS LOCATIONS
Contractor Name: Independent Structures Inc.
Contractor Address: 8431 HARTMEYER LN, Redding, CA 96002
Resident Engineer: Mohammad "Wali" Waziri Structure Rep.: Stephen Pozzo
Sample Information
DIME Sample ID: 2019-12-11-1
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 12/11/2019
Date that the sample was received by the laboratory/organization performing the testing: 12/18/2019
The quantity of what the sample constitutes: 68
A brief description of the sample: ASTM A325 1/2 x 2 3/4
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Structural and Steel Products
Material Information
Rocap Number(s):
Heat Number(s): NF15203266
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: A325
Bolt Length(s): 2 3/4"
Nut Specification: n/a
Washer Specification: n/a
Finish: mechanically galvanized to ASTM B695-04, class 55, type I
Diameter/Size: 1/2"
Bolt Mfg. Lot Number: 365604A
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test Results
Test 1 of 7
DIME Test ID: 2019-12-11-1-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 12/24/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325 Wedge Tensile
Test Result Compliance:
Additional Comments When Verified:
|
Number of Bolt Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 1A | 365604A | 0.5000 | 20406 | 90.77 | 10.00 | A325 Wedge Tensile | spaine |
| |
|
UTM
|
450kip
|
|
Temperature
|
no data
|
Test 2 of 7
DIME Test ID: 2019-12-11-1-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/24/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
365604A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.5 in
|
|
Bolt Length
|
2.75 in
|
|
Gage Type
|
Pass
|
Test 3 of 7
DIME Test ID: 2019-12-11-1-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/24/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
365604A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.5 in
|
|
Bolt Length
|
2.75 in
|
|
Gage Type
|
Pass
|
Test 4 of 7
DIME Test ID: 2019-12-11-1-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 12/24/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
365604A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.5 in
|
|
Bolt Length
|
2.75 in
|
|
Gage Type
|
Pass
|
Test 5 of 7
DIME Test ID: 2019-12-11-1-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/24/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
365604A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.5 in
|
|
Bolt Length
|
2.75 in
|
|
Measurement Average
|
3.06 mils
|
Test 6 of 7
DIME Test ID: 2019-12-11-1-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/24/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
365604A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.5 in
|
|
Bolt Length
|
2.75 in
|
|
Measurement Average
|
2.76 mils
|
Test 7 of 7
DIME Test ID: 2019-12-11-1-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 12/24/2019
Date Tested: 12/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
365604A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.5 in
|
|
Bolt Length
|
2.75 in
|
|
Measurement Average
|
2.88 mils
|
