Print Report | Back to Sample Detail

Sample Record for 2019-11-25-23

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 99999 DEA: 0322222 QA Service Level:
DIST-CO-RTE-PM: 03-SAC,OMG-888,99,80-0.6-0.6
Work Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Michael Maksimovich Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-11-25-23
TL Number from the TL Form:
Sample Submitted By Organization: ZZCT - Sacramento DIME Development - AVS Testing Internal
Sample Organization Contact:
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 11/25/2019
Date that the sample was received by the laboratory/organization performing the testing: 11/25/2019
The quantity of what the sample constitutes: 4 bins
A brief description of the sample: 1/2 inch HMA
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: BoDean Company

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-49-0032
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Manufacturer
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: Unknown
Lot number: Unknown
Sublot number: Unknown
Aggregate Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2019-11-25-23-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 03/10/2020
Date Tested: 11/25/2019
Submitted By Organization: ZZCT - Sacramento DIME Development - AVS Testing Internal
Organization Address: 123 Street,
Organization City: Sacramento
Organization State: CA
Organization Zipcode:
Organization Email:
Organization Phone:
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 95 %
Cumulative percent passing the 1/2 in. sieve 60.4 %
Cumulative percent passing the 3/8 in. sieve 80 %
Cumulative percent passing the 1/4 in. sieve 100 %
Cumulative percent passing the #4 sieve 66.8 %
Cumulative percent passing the #8 sieve 59.7 %
Cumulative percent passing the #16 sieve 56.2 %
Cumulative percent passing the #30 sieve 47.1 %
Cumulative percent passing the #50 sieve 46.9 %
Cumulative percent passing the #100 sieve 57.6 %
Cumulative percent passing the #200 sieve 66.73 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2019-11-25-23-2AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)11/25/201911/25/2019Irene KwanZZCT - Sacramento DIME Development - AVS Testing InternalIrene Kwan