Print Report | Back to Sample Detail

Sample Record for 2019-11-25-17

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 99999 DEA: 0322222 QA Service Level:
DIST-CO-RTE-PM: 03-SAC,OMG-888,99,80-0.6-0.6
Work Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Michael Maksimovich Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-11-25-17
TL Number from the TL Form:
Sample Submitted By Organization: ZZCT - Sacramento DIME Development - AVS Testing Internal
Sample Organization Contact:
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 11/25/2019
Date that the sample was received by the laboratory/organization performing the testing: 11/25/2019
The quantity of what the sample constitutes: 4 boxes
A brief description of the sample: 1/2 inch HMA
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Valero - Benicia

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number: Unknown
Sublot number: Unknown
HMA Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2019-11-25-17-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 03/10/2020
Date Tested: 11/25/2019
Submitted By Organization: ZZCT - Sacramento DIME Development - AVS Testing Internal
Organization Address: 123 Street,
Organization City: Sacramento
Organization State: CA
Organization Zipcode:
Organization Email:
Organization Phone:
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method B
Mass of the specimen basket assembly no data
Mass of the specimen and specimen basket assembly prior to ignition no data
Mass of HMA Sample prior to ignition 2345.0 g
Corrected Asphalt Binder Content 4.87 %
Mass Loss no data
Mass of aggregate remaining after ignition 2220.0 g
Correction Factor (Percent by mass of HMA Specimen) 0.42 %
Moisture Content 0.04 %
Temperature Compensation Factor no data
Test Temperature 1000 F